Setup - Bauer 20115E-B Owner's Manual & Safety Instructions

Set up instructions
read the EntirE iMpOrtant SaFEty inStructiOnS section at the beginning of this manual
including all text under subheadings therein before set up or use of this product.
note: For additional information regarding the parts listed in the following pages,
refer to the Assembly Diagram near the end of this manual.
assembly
install Safety Guard
1. CAUTION! TO PREVENT ACCIDENTAL
CUTS: Cover Line Cutter with a blade
cover before installing the Guard.
2. Remove Screw from bottom of
Trimmer Head. See below.
install Handle
1. Remove Handle Lock Knob from Handle.
2. Place Handle onto Handle Bracket.
3. Secure Handle to Bracket by placing Lock Knob
and Lock Screw through Handle and Bracket.
Knob
Item 57610
trimmer
Head
Handle
Bracket
For technical questions, please call 1-888-866-5797.
3. Attach Safety Guard to Trimmer Head
so that the Guard slides into the
corresponding slots on the Head.
4. Turn Trimmer upside down and secure Safety Guard
onto Trimmer Head with the Screw. See below.
Line
cutter
Safety
Guard
4. To adjust Handle, manually move Handle forward
or backward between 5 different locking positions.
5. To secure Handle, tighten Lock Knob.
Make sure that Handle is in desired
position before tightening fully.
Page 7