Epson Stylus CX7800 Quick Start Manual page 5

Placing Film and Slides
First, remove the document mat. Then follow the steps below:
Placing Film
1
Open the film strip cover and slide the strip of film into the film holder.
2 Place the film holder on the glass as shown.
3 Close the document cover.
You're ready to start a photo project. See one of these sections for instructions:
❍
"Making Photos From Slides and Negatives" on page 8
❍
"Restoring Faded Color Photos, Slides, and Negatives" on page 9
Pull up the fastener, then
pull out the document mat.
Insert the film under the tabs, with the shiny
(base) side up. Close the film strip cover.
Insert the tabs in the two
holes to the left of the glass.
5