Selecting The Paper Size - Epson Stylus CX6900 User Manual

Selecting the paper size

Before you receive a fax, be sure to load plain paper
and set the Paper Size setting to the size of paper you
have loaded. Also make sure the Automatic
Reduction setting is set to receive faxes in the desired
size (& "Selecting send/receive settings" on page 9).
Selecting send/receive settings
This product is set up to send and receive faxes using
the default settings below.
Setting and Description
Options
Paper Size
Indicates the size of the paper loaded
in the product for printing received
faxes.
Automatic Indicates whether large received
Reduction faxes are reduced in size to fit on the
selected Paper Size or printed at their
original size on multiple sheets.
Last Transmission Indicates whether or when the
Report product prints a report for outgoing
faxes. Select Off to turn off report
printing, Select On Error to print
reports only when an error occurs, or
select On Send to print reports for
every fax you send.
Dial Mode
Indicates the type of phone system to
which you have connected the
product.
DRD Indicates the type of answer ring
pattern you want to use to receive
faxes. You must have set up your
phone system to use different ring
patterns to select an option other than
All.
ECM: On/Off
Indicates whether you use Error
Correction Mode to automatically
request retransmission of fax data
that is received with detected errors.
V.34: On/Off Indicates the speed at which you
transmit faxes.
On is 33.6 Kbps and Off 14.4 Kbps.
Rings to Answer Indicates the number of rings that
must occur before the product
automatically receives a fax.
To change the fax settings listed above, follow these
steps:
1. Press the [ Fax] button once to enter Fax
mode. The [ Fax] button lights up and
you see this screen.
Enter fax number
2. Press the F [F Setup] button. You see this
screen.
1.Select Speed D
3. If you need to change the Paper Size, Automatic
Reduction, or Last Transmission Report settings,
press the u or d button, or press the 4 key on the
numeric keypad, to select 4.Scan & Print Setup.
4.Scan & Print S
Press the x OK button. You see this screen.
4.
1.Resolution
5. Press the u or d button, or press the 3, 4, or 5 key
on the numeric keypad, to display one of these
options:
■
3.Paper Size
■
4.Automatic Reduction
■
5.Last Transmission Report
Then press the x OK button.
6. Press the u or d button until the setting option
you want is displayed, then press the x OK
button to select it.
7. Repeat steps 5 and 6 to change any other settings.
When you are finished, press the y Stop
[y Cancel/Back] button to until you return to
the first screen.
8. If you need to change the Dial Mode, DRD, ECM,
V.34, or Rings to Answer settings, repeat steps 1
and 2, then press the u or d button, or press the
5 key on the numeric keypad, to select
5.Communication.
5.Communication
9. Press the x OK button. You see this screen.
1.Dial Mode: Ton
Faxing a Photo or Document
9