855H RECORDABLE HORN QUICK START GUIDE
This guide is designed to get the user quickly interfacing with the 855H Recordable Horn.
•
The unit can be set-up to either play an alarm tone followed by a recorded message, or
just play the recorded message.
•
The user can:
Record on each of the 4 stages using either the Line-in or Microphone inputs
o
o
Select the required alarm tone for each stage
o
Delete unwanted messages.
•
To re-record a message on a particular stage, the previous message on that stage must
be deleted first.
•
The "Mass Erase" function will erase all the recorded stages and also reset the unit.
•
Once the user has configured the unit, it must be put into its Playback Mode and S2
switches set to stage 1, as shown in Quick Ref - Playback Mode (Stage 1 illustrated)
guide below.
SWITCH S2 (SET-UP) FUNCTION SETTINGS
OFF Position Function
Switch
No.
1
Record Mode
2
Stage selection switch
3
Stage selection switch
4
Line-In selected
Program (Record &
5
Erase Mode ON)
Message & Tone
6
Playback
Single Message or Mass
7
Erase Mode OFF
(NOTE: "Black" color indicates "ON" position)
ON Position Function
Playback Mode
Switch 2 On & Switch 3 On = Alarm Stage 1
Switch 2 Off & Switch 3 On = Alarm Stage 2
Switch 2 On & Switch 3 Off = Alarm Stage 3
Switch 2 Off & Switch 3 Off = Alarm Stage 4
On board Microphone selected
Playback (Record & Erase Mode OFF)
Message only Playback
Single Message or Mass Erase Mode ON
6