Mounting Dimensions; Beacon Set-Up - AB Quality 855H Series Bulletin

MOUNTING DIMENSIONS

144.0
130.0
Ø7.4
126.0
855H-R30C

BEACON SET-UP

The 855H Combo units will have the beacon already pre-wired to the unit so no extra wiring is required. Beacon
will activate when any stage is energized.
The LED beacon is factory set to the 2Hz flash mode, but it can easily be set to steady mode if desired. To alter the
settings, change the position of the header pin as shown,
•
Remove header for steady mode.
•
Keep header in standard position for 2Hz flashing mode.
144.0
130.0
130.0
Ø7.4
86.2
86.4
133.5
126.0
855H-RC30Cx
126.0
130.0
86.4
BEACON
57.2
Ø7.4
133.5
130.0
144.0
855H-R45C
4
126.0
133.5
86.4
57.2
Ø7.4
130.0
86.2
86.4
130.0
144.0
126.0
855H-RC45Cx
133.5
130.0
BEACON