Installing Printer Software For Macintosh; Connecting The Epson Stylus Cx5200 - Epson Stylus CX5200 Software Installation

Installing Printer Software for
Macintosh

Connecting the EPSON Stylus CX5200

®
Before you start, make sure you set up your EPSON Stylus CX5200 and install
ink and paper, as described on the Start Here sheet. Then follow these steps to
®
connect the EPSON Stylus CX5200 to your Macintosh.
1. Remove the sticker from the USB port on the back of the Stylus CX.
2. Connect the square end of the USB cable to the USB port on the Stylus CX.
3. Then connect the flat end of the cable to a USB port on your Macintosh.
Flat end Square end
4. Follow the instructions in one of the next sections to install the printer
software on your Macintosh.
3