Specifications; Assembly And Adjustments - Craftsman CMXELAYMPL1032 Instruction Manual

1000 lumens led work light
Table of Contents

Advertisement

Available languages

Available languages

the user is encouraged to try to correct the interference by one
or more of the following measures:
Reorient or relocate the receiving antenna.
Increase the separation between the equipment and the
receiver.
Connect the equipment into an outlet on a circuit different
from that to which the receiver is connected
Consult the dealer or an experienced radio/TV technician
for help.
NOTICE: Per FCC Part 15, changes or modifications to this
equipment not expressly approved by CRAFTSMAN could void
your authority to operate this equipment.
This Class B digital apparatus complies with Canadian ICES-
003.
SAVE THESE INSTRUCTIONS
FOR FUTURE USE
Refer to Figure A at the beginning of this manual for a
complete list of components.
Intended Use
This work light is suitable for Indoor Use.
DO NOT use under wet conditions or in presence of
flammable liquids or gases.
DO NOT let children come into contact with the work light.
Supervision is required when inexperienced operators use
this work light.

Specifications

Model
Power
Brightness
Color Temperature
Color Rendering Index
Input Voltage
Location Rating
Power Cord
Net Weight
UNPACKING

WARNING: It is unlikely the product is faulty or has
a missing component. If you find product is faulty,
do not operate the product until the parts have been
replaced or the fault has been rectified. Failure to do so
could result in serious personal injury.
Remove work light from carton and discard all packaging.

ASSEMBLY AND ADJUSTMENTS


WARNING: To reduce the risk of serious personal
injury, turn unit off, disconnect it from power
source and put it on a stable secure position
before making any adjustments.

WARNING: Risk of unsafe operation. When
performing maintenance, you may be exposed to
CMXELAYMPL1032
12 Watts
1,000 Lumens
4000K
80
AC 120V 60Hz
Damp Locations
5 ft
1.08 Lbs.
voltage sources. Personal injuries can occur. Before
performing any maintenance, disconnect power
source from the work light.
The work light is fully assembled out of the box.
Adjust work light (Fig A. B. C)
Take out the worklight and adjust the pivoting handle
desired position, like fig C shown.
Fig B.
Fig C.
Plug-in Instructions

WARNING: Risk of Electrical Shock. This fixture
IS ONLY FOR USE ON 120V and is equipped with
an approved power cord with a polarized plug.
TO REDUCE THE RISK OF ELECTRICAL SHOCK, it
should only be plugged into a polarized outlet
in only one way. If it does not fit fully in the
outlet, reverse the plug. If it still does not fit,
contact a qualified electrician. NEVER use with
an extension cord unless the plug can be fully
inserted. DO NOT alter the plug. DO NOT use the
product if power cord is frayed or broken. Do not
use in or near standing water, or where water
may accumulate. Keep this fixture at least 16
feet from pools or spas. Keep plug dry. DO NOT
IMMERSE THIS FIXTURE.
English
to
 5 
5
3

Advertisement

Table of Contents
loading

Table of Contents