Download Print this page

Craftsman 73919 Owner's Instructions

Led work light
Hide thumbs

Advertisement

Quick Links

RechaRging Utility light
1.
Turn fixture OFF.
2.
When charging with AC adapter, insert the battery charger plug into the jack on the worklight handle and the other
end into a standard 110-120V AC outlet.
NOTE: Batteries will reach full charge in about 2 hours. LED indicator light glows red while the batteries
are charging.
hanging Utility light
1.
Hanging hook can rotate 360°.
Maintenance
Before performing any maintenance, ALWAYS unplug worklight. Remove dirt and grime as soon as it accumulates. Use
a soft, damp cloth and a mild soap, if needed. Be sure not to get the electrical lug wet. NEVER submerge any part of the
worklight in any solution to clean it. DO NOT USE solvents such as gasoline, turpentine, etc. to clean unit. Aerosols and
other chemicals may fog the clear polycarbonate lens.
One yeaR FUll WaRRanty On WORklight
If this product fails due to a defect in material or workmanship within one year from the date of purchase, RETURN IT TO
YOUR NEAREST SEARS STORE OR CRAFTSMAN OUTLET IN THE UNITED STATES, and it will be replaced free of charge.
This warranty applies for only 90 days from the date of purchase if this Craftsman Worklight is used for commercial or
rental purposes. This warranty gives you specific legal rights, and you may also have other rights, which vary from state
to state.
Sears, Roebuck and Co., Hoffman Estates, IL 60179 USA
Assembly or operation questions? Call 1-800-469-4663
www.craftsman.com
Owner's Instructions
IMPORTANT SAFETY
INSTRUCTIONS
SAVE THESE INSTRUCTIONS!
DANGER
- TO REDUCE THE RISK OF ELECTRIC FIRE OR ELECTRIC
SHOCK, CAREFULLY FOLLOW THESE INSTRUCTIONS.
WARNING
- When using electrical fixtures, base precautions
should always be followed, including the following:
1.
Read all instructions before using the fixture.
2.
DO NOT handle this fixture or try to plug it in when your hands are wet or damp
or when you are standing on a wet or damp surface or in water.
3.
To reduce the risk of injury, close supervision is necessary
when an fixture is used near children.
4.
ONLY USE attachments recommended or sold by the manufacturer.
5.
DO NOT use outdoors. This fixture is intended for use as general indoor lighting.
6.
DO NOT use in potentially dangerous locations, such as flammable or
explosive atmospheres.
7.
DO NOT use in potentially dangerous locations, such as flammable or
Printed in China
explosive atmospheres.
07/2014 825-0972
LED Work Light
MoDEL No. 73919

Advertisement

loading

  Related Manuals for Craftsman 73919

  Summary of Contents for Craftsman 73919

  • Page 1 This warranty applies for only 90 days from the date of purchase if this Craftsman Worklight is used for commercial or To reduce the risk of injury, close supervision is necessary rental purposes.
  • Page 2 To reduce the risk of electric shock, do not put in water or other liquid. Do not DO NOT look directly into the light. place or store appliance where it can fall or be pulled into a tub or sink. NEVER ATTEMPT TO PICK UP This device complies with Part 15 of the FCC Rules.

This manual is also suitable for:

03473919000p