Table of Contents
Advertisement
Warning : Always place the battery on a heat resistant surface and never leave it unattended!
Remote Control / Transmitter
- Using the throttle you can control the rotation axis of the drone. Using the directional joystick you can control the flight direction
of the drone.
- The mode available on this model is the mode 2 with the layout of the throttle on left. It is not possible to switch mode on this
model.
- The different calibration buttons help keep the drone stationary. Test this by pressing the accelerator and calibration buttons to
maintain the drone in one place.
- You can choose the percentage of the speed. The higher the value, the faster the reaction will be (e.g. 100% will be more
responsive than 40%).
- The two module buttons are used to activate different modules : photos / shots / basket.
Copyright WLtoys.eu | DroneX BV
Plug the USB into a USB socket and connect the copter to the
charger. This can only be done in one way: by firmly connecting
the charging cable.
Red LED ON = charged
Red LED OFF = charging
1.
Power LED
2.
Module 1 : Water jet; bubble jet; video; basket up; lead
single missile
3.
Throttle/Yaw control stick
4.
Throttle trim
5.
Yaw trim
6.
40% agility
7.
60% agility
8.
80% agility
9.
LCD display
10.
Power switch
11.
Antenna
12.
Roll (when 100%)
13.
Direction control stick
14.
Forwards and backwards trim
15.
Crab trim
16.
100% agility
17.
Lighting control
18.
Module 2 : Taking photos(Headless mode if available,
press 2 sec)
Advertisement
Table of Contents
