Advertisement
Before beginning the assembly of the product,make sure all parts are present.
Compare the parts with package contents list and hardware contents list.
If any parts are missing or damaged,do not attempt to assemble the product.
Tool required for assembly (included) : Allen key and Wrench.
1
D
Step1: attach the left side (D) to the seat (B), back (A),
bottom (C) as shown on the picture.Using the Allen bolt (F1),
the Allen screw (F3) and tighten with the Allen key (F7). Make
sure you don't tighten too tight and you will do at the end.
3
Step 3: Use the Allen bolt S (F2) to fix the back (A)
as shown on the picture by using the Allen key (F7).
F7
F1
F1
F5
F1
F5
A
B
2
A
A
Step 2: repeat with the right side (E) as step 1 as shown on the
picture. At last tighten all bolts and screws.
4
C
Step 4: put the bottom (C) using the Allen nut (F4) as shown
on the picture. Tighten the Allen nut (F4) by using the Allen
key (F7) and wrench (F6).
F7
F1
F1
F5
F1
F5
B
Advertisement
