LG F2720SVTV Owner's Manual page 39

Symptoms
Electrical power cord may not be
plugged in or connection may be loose.
Washing
House fuse blown, circuit breaker
machine does
tripped,or a power outage has occurred.
not start
Water supply tap is not turned on.
Washing
machine will not Check that the door is firmly shut.
spin
Door does not
open
Wash cycle time
delayed
Fabric softener Too much softener may cause an
overflow overflow.
Softeners
dispensed too
early
Dry problem Does not dry
Reason Solution
• Make sure plug fits tightly in wall outlet.
• Reset circuit breaker or replace fuse. Do
not increase fuse capacity. If problem is
a circuit overload, have it corrected by a
qualified electrician.
• Turn on water supply tap.
• Close the door and press the Start/Pause
button. After pressing the Start/Pause
button, it may take a few moments before
the washing machine begins to spin. The
door must be locked before spin can be
achieved. Add 1 or 2 similar items to help
balance the load. Rearrange load to allow
proper spinning.
• Once washing machine has started, the
door cannot be opened for safety reasons.
Check if the 'Door Lock' icon is illuminated.
You can safely open the door after the
'Door Lock' icon turns off.
• The washing time may vary by the
amount of laundry, water pressure, water
temperature and other usage conditions.
If an imbalance is detected or if the suds
removing programme is on, the wash time
will increase.
• Follow softener guidelines to ensure
appropriate amount is used. Do not
exceed the maximum fill line.
• Close the dispenser drawer slowly. Do not
open the drawer during the wash cycle.
• Do not overload. Check that the washing
machine is draining properly to extract
adequate water from the load. Clothes
load is too small to tumble properly. Add a
few towels.
39