Problem Solving - Russell Hobbs RHCV25AS02 Manual

PROBLEM
The vacuum cleaner is
plugged in but does
not work
The suction is
decreasing and the
vacuum is not picking
up dirt
Vacuum cleaner is
over heating
Automatic power cord
rewind does not fully
rewind the power
cord
Dust is coming out of
the vacuum cleaner
The air coming out of
the vacuum cleaner
smells
For Customer Services & Spare Parts please call 0345 209 7461
Opening times: Monday - Friday 8am – 8pm & Saturday 9am – 1pm

PROBLEM SOLVING

POSSIBLE PROBLEM
Power cord/plug damage Check the power cord and plug for signs of damage.
Fuse is damaged
Dust container
Filters are dirty
Hose/head blockages
Filters are dirty
Dust container fitting
Filters are dirty
Filters are not dry
We're here should you need us.
Or visit us at www.productcare.co.uk
POSSIBLE SOLUTION
Check and replace the fuse in the plug.
Check if the dust container is full, if so, empty it.
Clean the filters.
Check that there are no blockages in the hose or cleaning
head.
Check that the filters are not blocked, if so, clean them
following the instructions in this booklet.
Pull the power cord fully out and press the rewind button
again.
The dust container has not been fitted correctly. Refit the
container following the instructions in this booklet.
Clean the filters. Also clean the hose and dust container
Ensure the filters have been left to dry for 24 hours before
refitting back into the vacuum cleaner and using.
18