MASSEY FERGUSON MF400Xtra Workshop Manual page 12

- Always disconnect the negative cable from the
battery, so that no one can accidentally turn on
the starter motor.
- When welding, as well as disconnecting the
battery, you should use the proper protection:
safety mask or goggles, gloves and apron. If
you don't use eye protection, for example, you
can do permanent damage to your eyes very
quickly!
- When splitting a tractor, you must use the right
cranes and tackle. This will make the work safer,
but also better quality and more profitable.
Always use wooden wedges to chock the
wheels which will not be removed in the job.
- Don't let the floor of the workshop get soaked
with oil: it will cause accidents, and it lowers the
tone of the shop. Remember: well organized
workshop reflects the quality of the people that
work there.
MF 400 Xtra
Fig. 3
Fig. 4
Fig. 5
Fig. 6
Introduction
01
01A01-5