Envision L19W461 User Manual page 9

3. Remote control:
Remove the cover of the battery compartment. Insert the 2 batteries supplied
(Type AA 1.5V).
4. Power:
Insert the power cord in the wall socket having an AC power supply. Then push
the AC power switch to ON state. You can see
the LED color is Blue, means the TV set is power on. If the LED color is
Amber, which means this TV set is in stand
5. Turn on the TV:
Push the POWER key on the Remote control or the control knobs on top of TV.
The TV will be power-on and the user can see the display on the screen after a
few seconds .
POWER key
LED status
by mode.
8
at the front panel. If