FOR YOUR SAFETY ... 1 PRECAUTIONS AND REMINDERS ... 2 IMPORTANT SAFETY INSTRUCTIONS ... 3 Wall-mount instruction ... 4 ACCESSORIES... 6 FRONT PANEL BUTTONS ... 7 BACK PANEL BUTTONS... 8 REMOTE CONTROL ... 9 INSTALLATION...11 Connecting RF antenna and Cable TV ...11 Connecting to DVD / Set Top Box...11 Connecting to External Stereo System to Listen to LCD TV Sound...
FOR YOUR SAFETY Before operating the TV please read this manual thoroughly. This manual should be retained for future reference. FCC Class B Radio Frequency Interference Statement WARNING: (FOR FCC CERTIFIED MODELS) NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
PRECAUTIONS AND REMINDERS Place unit on even surfaces. Unplug immediately if is malfunction like no picture, no video/audio,smoke and bad odor from TV. Don't throw any object inside the TV box like metals or other flammable materials. Don't place the TV in confined spaces or in a box when using it.
Page 5
Remember to unplug the AC cord from the AC outlet before cleaning. Do not use liquid cleaners or aerosol cleaners to clean the display. Make sure to unplug the unit when not in use for a long period of time (days). Do not cover or block any vents and openings.
IMPORTANT SAFETY INSTRUCTIONS Read before operating equipment Read these instructions. Keep these instructions. Heed all warnings. Follow all instructions. Do not use this apparatus near water. Clean only with a dry cloth. Do not block any of the ventilation openings. Install in accordance with the manufacturers instructions.
Page 7
18. Tilt/Stability – All televisions must comply with recommended international global safety standards for tilt and stability properties of its cabinets design. Do not compromise these design standards by applying excessive pull force to the front, or top, of the cabinet, which could ultimately overturn the product.
Wall-mount instruction Preparing To Install The Optional Wall Mount Arm (not included) This TV can be attached to a wall mounting arm you can purchase separately. Turn the power OFF then disconnect the cables from the TV before performing the procedure below. 1.
Page 9
Attaching The Optional Wall Mount Arm (not supplied) Follow these steps to finish installing the wall mounting arm: 1. Place the wall mounting arm onto the back of the TV. Line up the holes of the arm with the holes in the back of the monitor.
ACCESSORIES Thank you for purchasing this LCD-TV. This LCD-TV package comes with: LCD TV User’s Guide book Remote control Battery AAA x 2 Power Cord RCA A/V Cable...
FRONT PANEL BUTTONS Volume Down Volume Up On Screen Display Menu On/Off CH Down CH Up Enter Power ON/OFF button Remote Control Receiver ❾ Power LED Indicator (Only for DTV source in this model.) Manufactured under license from Dolby Laboratories. Dolby and the double-D symbol are trademarks of Dolby Laboratories.
Page 14
Remote control button function as follows: POWER INFO SOUND SLEEP FREEZE ZOOM 0~9, - number VOL + and VOL - GUIDE FAV.A/D UP/DOWN/LEFT/RIGHT/ ENTER INPUT MUTE TV/CATV PICTURE WIDE RETURN ▲ ▼ and CH FAV.CH MENU Power On/Off Select Mono, Stereo or SAP sound Display current information Select Sound modes Set timer to turn off TV...
INSTALLATION Connecting RF antenna and Cable TV Make sure the power is OFF before installing your LCD TV. 1) AIR TV: Connect the LCD TV to TV antenna with 75-ohm coaxial cable. Preset the air TV channels into memory with AUTO SCAN function when using an antenna TV system. This air input jack both support TV and DTV systems.
Page 16
2) With S-Video cable: 3) With YPbPr cable: 4) With HDMI 1 or HDMI 2 cable: S-Video Cable (not supplied) VCD or DVD Player YPbPr Cable (not supplied) VCD or DVD Player HDMI Cable (not supplied) Audio in Cable (not supplied) Audio in Cable (not supplied) VCD or DVD Player...
With DVI cable (HDMI 1) [for AV device]: With DVI cable (HDMI 2) [for AV device]: Connecting to External Stereo System to Listen to LCD TV Sound Connect the audio output terminal of the LCD TV to audio in terminal of the stereo system (stereo system sold separately).
Connecting to the Headphone Connect the headphone to the headphone output terminal of the LCD TV. (Headphone sold separately). Headphone (not supplied) Connecting to a Computer 1) With VGA Cable: Connect the VGA cable from VGA output of the computer to the VGA terminal input of your LCD TV.
Connecting to A/V Device with SPDIF input Connect SPDIF optical cable from A/V device into the SPDIF output connector of LCD TV. Connecting with the power cord Connect the power cord to the AC inlet on the back of your LCD TV, after all connections have been completed, and plug the other end of the power cord into a correctly grounded electrical outlet.
BASIC OPERATION To operate your LCD TV, you may use the TV remote control or top panel buttons to select input source, change channels, or adjust volume. Turning on the LCD TV Before using the LCD TV: 1. Connect external equipment properly. 2.
Electronic Program Guide (EPG) Press the GUIDE button on the remote control and the program information for the channel you are watching will be displayed on the screen with the live program content in a small window in the lower left corner of the panel. Press the ◄...
Using the OSD function You can use the OSD menus and options to adjust various settings by using the remote control. The basic operation is as following: Press MENU to display OSD menu. Press ▲▼ to select your desired top Menu, and press ENTER or ◄► to enter it. Use ▲▼...
Tint: To adjust tint level. (right: greenish tone, left: reddish tone.) Sharpness: To adjust picture sharpness. (right: sharper, left: softer.) Color Temperature: Press ENTER to select color temperature from User, Cool, Normal, and Warm. (When Color Temperature is selected to User, the R, G, B Gain level can be adjusted separately.) Auto Adjust: Press ENTER to auto adjust picture’s horizontal position, vertical position, fine tune and H-Size.
In AV, S-Video, YPbPr 1, YPbPr 2, HDMI 1, HDMI 2, VGA source: Balance: To adjust left and right audio balance. Bass: To adjust bass. Treble: To adjust the treble. Surround: To enjoy a concert hall effect, select “On” when stereo is playing. Reverb: To enjoy the reverb sound effect of Concert, Living Room, Hall, Bathroom, Cave, Arena, or Church.
Channel Skip: Press ENTER to skip the channel. To restore the channel, press ENTER again. MTS: To select audio mode from Mono, Stereo, or SAP when available. Audio Language: To select audio language from English, Spanish, or French. Setup Menu —To set up OSD window In TV, AV, S-Video, YPbPr 1, YPbPr 2, HDMI 1, HDMI 2 source: (When in AV, S-Video, YPbPr 1, YPbPr 2, HDMI 1 or HDMI 2, the TV option on the left does not...
Page 26
Blue Mute: To set the background color to blue when there is no signal. Time Setup: To set Time Zone, Time, Sleep Timer, and Auto Sleep. Time Zone: To select the time zone appropriate to your location. Time: To set the current time. ‧...
‧ Font Size: To select a font size from Large, Small, or Medium. ‧ Font Color: To select a font color from Black, White, Green, Blue, Red, Cyan, Yellow, or Magenta. ‧ Font Opacity: To select font opacity from Solid, Translucent, or Transparent. ‧...
Page 28
Channel Block: To block channels. Use ▲▼ to select the channel you want to block, and then press ENTER to block or unblock it. Program Block: To set TV and Movie Ratings. Rating Enable: Choose “On” to enable the below settings. U.S.
Page 29
U.S. Movie Ratings: To adjust movie blocking level in the US. You can select between G, PG, PG-13, R, NC-17, or X. The Movie Ratings in the US are defined as following. General audience Parental guidance suggested PG-13 Parents strongly cautioned Use ENTER button to block or unblock the ratings, and use MENU to exit.
Page 30
Exempt General 8 and + Children eight years and older Use ENTER button to block or unblock the ratings, and use MENU to exit. Block Unrated: To block unrated movie or TV programs. Input Block: To set the input source to be blocked. Users will not be able to watch the content coming from the blocked input source.
TECHNICAL SPECIFICATION Type Color Filter Glass surface Input signal Video Audio Compatibility Resolution Recommended and supported Speaker Output Audio Output Power Voltage Display area Full Scan Operating Temperature conditions Humanity Altitude Storage condition Temperature Humanity Altitude Dimensions Physical Weight Regulations Power saving modes Stand by Preset Timing Mode (Pre-adjusted to GTF®...
CARE AND MAINTENANCE Care Avoid exposing your LCD TV directly to sunlight or other heat source. Place your LCD TV away from the sun to reduce glare. Put your LCD TV in a well ventilated area. Do not place anything heavy on top of your LCD Make certain your LCD TV is installed in a clean and moisture-free area.