Mercedes-Benz GLA 180 Owner's Manual page 285

Operating system
282
rately in the device list. These are found below
the entry MB SAP module phones MB SAP module
Connecting a mobile phone (Audio 20)
Requirements
For telephony via the Bluetooth
require at least one Bluetooth
phone depending on use of one-telephone
mode or two-telephone mode. The mobile
phone must support Hands-Free Profile 1.0 or
above.
In two-telephone mode you can use all the
functions of the multimedia system with the
main telephone. With the additional tele-
phone, you can receive incoming calls.
Multimedia system:
Select Vehicle VehicleQSystem set‐
X
tingsQActivate Bluetooth tings Activate
Activate Bluetooth
X
Mobile phone:
Activate Bluetooth
X
®
tooth visibility for other devices (see the
manufacturer's operating instructions).
®
The Bluetooth device names for all of one man-
ufacturer's products might be identical. To
make it possible to clearly identify your mobile
phone, change the device name (see the man-
ufacturer's operating instructions).
If the mobile phone supports the PBAP (Phone
Book Access Profile) and MAP (Message
Access Profile) Bluetooth
ing information is transmitted after you connect
the main telephone:
Telephone book
R
Call lists
R
Text messages and e-mails
R
i
Further information on suitable mobile
phones can be found at: http://
www.mercedes-benz.com/connect
Searching for and authorising (connect-
ing) a mobile phone
Before using your mobile phone with the multi-
media system for the first time, you will need to
search for the phone and then authorise (con-
nect) it. Depending on the mobile phone, author-
phones.
®
interface, you
®
-capable mobile
System set‐
Bluetooth.
®
O.
®
and, if necessary, Blue-
®
profiles, the follow-
isation takes place by means of Secure Simple
Pairing or by entering a passkey. The multimedia
system automatically makes the procedure that
is relevant for your mobile phone available. The
mobile phone is always connected automati-
cally after authorisation. Further information on
using a mobile phone with the multimedia sys-
tem (see the Digital Owner's Manual).
If the multimedia system does not detect your
mobile phone, this may be due to particular
security settings on your mobile phone (see the
manufacturer's operating instructions).
Searching for a mobile phone
Multimedia system:
Select Tel/®QConnect device Tel/ Connect deviceQCon‐
X
nect new device nect new device.
Select Connect via Connect via vehicle
X
Select the mobile phone.
X
Connecting the mobile phone
One-telephone mode: select
X
Two-telephone mode: select
X
phone (incoming calls only) phone (incoming calls only)
mobile phone is already connected.
Authorisation using Secure Simple Pair-
X
ing:
A code is displayed in the multimedia system
and on the mobile phone.
Confirm the code on the mobile phone.
X
Depending on the mobile phone used, con-
firm the connection to the multimedia system
and for the PBAP and MAP Bluetooth
files. The prompt to confirm may take up to
two minutes to be displayed (see the manu-
facturer's operating instructions).
If the codes are different: select
X
multimedia system.
The process is cancelled.
Repeat authorisation.
or
Authorisation by entering a passkey
X
(passcode): enter any one- to sixteen-digit
number sequence which you have chosen
yourself.
Press ¬ to confirm.
X
Enter and confirm the passkey on the mobile
X
phone. Depending on the mobile phone used,
confirm the connection to the multimedia sys-
tem and for the PBAP and MAP Bluetooth
profiles. The prompt to confirm may take up
Con‐
vehicle.
Main Main phone phone.
Additional Additional
when a
®
pro-
No No on the
®