Overview of climate control systems
130
appears for approximately three seconds at
the bottom of the screen in the multimedia
system display; see separate operating
instructions. You will see the current settings
of the various climate control functions.
DYNAMIC SELECT button (except
Mercedes-AMG vehicles)
You can choose between various drive programs
with the DYNAMIC SELECT button
(
page 151).
Y
If you have selected drive program E:
when heating, the electrical heater booster is
R
deactivated and in the warming-up phase
heat output is reduced
the rear window heating running time is
R
reduced
Control panel for THERMOTRONIC automatic climate control (2-zone)
:
To set the temperature, left (
;
To set climate control to automatic mode (
To demist the windscreen (
=
To increase the airflow (
?
To set the air distribution (
A
Display
B
To activate/deactivate air-recirculation mode (
C
To switch the climate control on/off (
D
To set the temperature, right (
E
To switch the residual heat on/off (
F
To activate/deactivate cooling with air dehumidification (
G
To reduce the airflow (
H
page 133)
Y
Y
page 134)
Y
page 134)
Y
page 133)
Y
page 131)
Y
page 133)
Y
page 137)
Y
page 134)
Y
Depending on the configuration, the climate set-
tings can also be influenced in drive program I.
If you have selected drive program C or S, the
climate settings are not affected.
ECO start/stop function
During automatic engine stop, the climate con-
trol operates only at a reduced capacity. If you
require the full climate control output, you can
switch off the ECO start/stop function by press-
ing the ECO button (
Y
page 132)
page 135)
Y
page 132)
Y
page 149).