Mercedes-Benz GLA 180 Owner's Manual page 208

under the front bumper
R
very close to the front bumper
R
very close to the rear bumper
R
under the rear bumper
R
in the area immediately above the recessed
R
handle on the boot lid
very close to the exterior mirrors
R
You are responsible for safety at all times and
must always pay attention to your immediate
surroundings when parking and manoeuvring.
This applies to the areas behind, in front of and
beside the vehicle. You could otherwise endan-
ger yourself and others.
The 360° camera will not function or will func-
tion only to a limited extent:
if the doors are open
R
if the exterior mirrors are folded in
R
if the tailgate is open
R
in heavy rain, snow or fog
R
at night or in very dark places
R
if the cameras are exposed to very bright light
R
if the area is lit by fluorescent lamps or LED
R
lighting (the display may flicker)
if there is a sudden change in temperature,
R
e.g. when driving into a heated garage in win-
ter
if the camera lenses are dirty or covered
R
if the vehicle components in which the cam-
R
eras are fitted are damaged: In this event,
have the camera position and setting checked
at a qualified specialist workshop
Do not use the 360° camera under such cir-
cumstances. You could otherwise injure others
or damage objects when parking the vehicle.
Activation conditions
The 360° camera image can be displayed if:
your vehicle is equipped with a 360° camera
R
COMAND Online is switched on; see the sep-
R
arate COMAND Online operating instructions
the 360° camera 360° camera function is activated
R
Activating the 360° camera using the
SYS button
Press the W button for longer than 2 sec-
X
onds; see the separate COMAND Online oper-
ating instructions.
The following appears depending on whether
gear h or k is selected:
full-screen view with image from the front
R
camera
full-screen view with image from the revers-
R
ing camera
Activating the 360° camera using
COMAND Online
Press the W button, see the separate
X
COMAND Online operating Instructions.
Select System System by turning cVd the COMAND
X
controller and press W to confirm.
Select 360° camera 360° camera
X
The following appears depending on whether
gear h or k is selected:
a split screen with top view and the image
R
from the front camera or
a split screen with top view and the image
R
from the rear view camera
For further information on the COMAND con-
troller; see the separate COMAND Online oper-
ating instructions.
Switching on the 360° camera using
reverse gear
You can show images from the 360° camera
automatically by engaging reverse gear.
Make sure that the key is in position 2 in the
X
ignition lock.
Make sure that the
X
setting is active in COMAND Online, see the
separate COMAND Online operating instruc-
tions.
To show the 360° camera image: engage
X
reverse gear.
The area behind the vehicle is shown in the
COMAND display in split-screen mode:
vehicle with guide lines
R
top view of the vehicle
R
Driving systems
and press W to confirm.
Activation by R gear Activation by R gear
205
Z