Operating the climate control systems
140
time and at an unsuitable location. When setting
the departure time, observe the important
safety notes (
Y
Briefly press the u button.
X
Press the , or . button repeatedly
X
until the time to be changed appears in the
display.
Press the u and ^ buttons at the same
X
time.
The Î symbol in the remote control display
flashes.
Press the , or . button to set the
X
desired departure time.
i
The longer you press the , or . but-
ton, the faster the time changes.
Press the u and ^ buttons at the same
X
time.
The new departure time is stored.
Activating the set departure time
Briefly press the u button.
X
Press the , or . button repeatedly
X
until the desired departure time appears in
the display.
Press the u button.
X
The Í symbol, the departure time and,
depending on the selected departure time,
the letter A, B or C appear in the display.
Deactivating the set departure time
Briefly press the u button.
X
The status of the auxiliary heating is shown on
the display.
Press the . button.
X
The first departure time stored appears on the
display.
Press the ^ button.
X
OFF is shown in the remote control display.
Replacing the remote control battery
Important safety notes
G
WARNING
Batteries contain toxic and corrosive substan-
ces. If batteries are swallowed, it can result in
severe health problems. There is a risk of fatal
injury.
page 137).
Keep batteries out of the reach of children. If
a battery is swallowed, seek medical attention
immediately.
H
Environmental note
Batteries contain pollutants.
It is illegal to dispose of them
with the household rubbish.
They must be collected sep-
arately and disposed of in an
environmentally responsible
recycling system.
Dispose of batteries in an
environmentally responsible
manner. Take discharged
batteries to a qualified spe-
cialist workshop or to a col-
lection point for used batter-
ies.
Replacing the battery
A CR2450 lithium battery is required when
replacing the battery.
Press a pointed object into recess :.
X
Slide battery cover ; backwards in the direc-
X
tion of the arrow.
Insert new battery = with the lettering facing
X
upwards.
Slide battery cover ; in the opposite direc-
X
tion to the arrow on the remote control until it
engages.