Table of Contents
Advertisement
DOK-SUPPL*-VPB*40.1***-PR02-EN-P
Rexroth IndraControl VPB 40.1 Control Cabinet PC
1
System Presentation
1.1
Brief Description VPB 40.1
1.2
Variants
1.2.1
Characteristic Features
The VPB 40.1 is a control cabinet PC that forms a PC-based operator terminal
when combined with a VDP 16, VDP 40 or VDP 60 display. Depending on the
application or configuration, the operator terminal can also fulfill the control
functionalities.
Fig.1-1:
VPB 40.1 with 3-slot box and connected display VDP (not included in
the scope of delivery)
The VPB 40.1 is connected to the G4 or G5 serial display interface of VDP 16,
VDP 40 or VDP 60 via a connecting cable with a length of up to 30 m. Thus,
the VPB 40.1 can be installed in the control cabinet and the display in its door
or at the machine.
The VPB 40.1 consists of two tightly connected parts:
●
The PC box contains the actual PC, including the hard disk and the power
supply unit with uninterruptible power supply (UPS). Depending on the
variant the PC box provides three or four slots. The standard interface and
some special interfaces are available on a plugboard.
●
The display interface and a RS422 interface (X39), which is to be used as
alternative for the 24 V interface XCOM1, are integrated in the second
housing part mounted on the PC box. Furthermore, five LEDs to display
device states and errors are arranged on this housing. Also, the optionally
available DVD ROM drive or the CD RW recorder system are mounted
here.
The VPB 40.1 is available in two different housing variants. The possible var‐
iants are described in the designation codes, see
nation Code" on page
73. Principally, they differ in the used PC box equipped
with 3 or 4 slots.
PC box
Free slots
Voltage supply
Bosch Rexroth AG
chapter 11.1 "Type Desig‐
Type A
3
AC 85 V to AC 264 V
or DC 24 V
5/81
System Presentation
Type C
4
Advertisement
Table of Contents
