Table of Contents
Advertisement
36/81
Bosch Rexroth AG
Connections
7.2.7
Ethernet Interface XEthernet
XEthernet – Network Connection
Fig.7-9:
USB interfaces XUSB1 and XUSB2
Pin
Function
1
USB power supply (max. 500 mA)
2
Data -
3
Data +
4
USB ground
Fig.7-10:
USB interfaces - XUSB1 and XUSB2
The VPB 40.1 can be connected to an Ethernet network via the XEthernet in‐
terface.
RJ45, female connector, 8-pin
Type:
Cable length:
Cable type:
Transmission rate:
Fig.7-11:
Ethernet interface - XEthernet
Fig.7-12:
Ethernet interface XEthernet
The driver configuration of the network connection can be called up in the task
bar or in the "Control Panel" with the "Network board" icon. Here you can set
among other values, if the data transmission shall occur with 10 Mbit/s or with
100 Mbits/s via the network.
DOK-SUPPL*-VPB*40.1***-PR02-EN-P
Rexroth IndraControl VPB 40.1 Control Cabinet PC
Ethernet 10Base T / 100Base X
100 m max.
Shielded, twisted pair
10 or 100 MBit/s
Advertisement
Table of Contents
