Table of Contents
Advertisement
DOK-SUPPL*-VPB*40.1***-PR02-EN-P
Rexroth IndraControl VPB 40.1 Control Cabinet PC
UPS NT - Operation and Configuration
Start/Stop
Once the voltage monitoring has been activated, the system shutdown cannot
be stopped anymore.
Closing all active applications prevents data loss in the event of an unexpected
voltage breakdown. After a maximum of 60 seconds the UPS switches off the
PC power supply unit, if the supply voltage has not been restored, see
"Operating Principle of the UPS" on page
During normal operation the user cannot access the UPS NT program. The
program can be operated and set only with special rights and after a restart of
the operating system.
NOTICE
Parameters set in UPS NT may be only changed after consulting Bosch
Rexroth.
NOTICE
Administrator rights are necessary for operation!
The UPS NT program starts automatically while Windows XP is booted.
If the service shall be stopped, terminated or restarted (e.g. because of a rein‐
stallation or update), select the service manager in the Windows Control Panel.
Fig.9-1:
Service manager of the Windows control panel
The respective operating status of the service is indicated in the Windows task
bar.
Bosch Rexroth AG
59.
Possible damages to connected machines if a
shutdown of the VPB 40.1 is caused by wrong
UPS NT parameters.
No operation possible due to missing adminis‐
trator rights.
61/81
Software
chapter
Advertisement
Table of Contents
