Operation And Digital Programmer Circuit Test Procedure - Panasonic NN-T793SF APH Service Manual

OPERATION AND DIGITAL PROGRAMMER CIRCUIT TEST PROCEDURE

When you pluge the power supply cord into the wall outlet, microwave oven automatically enter into the state of lb / oz. If you want
to use g / kg state, please press Start pad after pluging the power source.
1. To Set Clock
OPERATION
1. Plug the power supply cord into
wall outlet.
2. Press Clock pad.
3. Enter time of day (TOD) by press-
ing appropriate Number pads.
4. Press Clock pad. TOD has now
been resistered into the digital
programmer circuit and will count
up by minutes.
2. Time Cooking for Two Stage
OPERATION
1. Place a water load in the oven.
2. Press Power Level pad once
to set High power.
(1st stage)
3. Set for 5 seconds by pressing
Number pads.
5 sec.= 5
4. Press Power Level pad 4 times 6
to set Medium power.
(2nd stage)
5. Set for 1 minute by pressing
Number pads.
1 min.= 1 0 0
6. Press Start pad.
7. When 1st stage cooking time has
elapsed. Oven beeps twice and
automatically switches to 2nd
stage cooking.
SCROLL DISPLAY
8 8 . 8 8
1 1 2 5
1 1 . 2 5
SCROLL DISPLAY
P 1 0
. 5
P 5
1.0 0
. 5
1.0 0
OPERATION
8. When 2nd stage cooking time has
elapsed, oven beeps 5 times and
shuts off.
3. Inverter Turbo Defrost
OPERATION
1. Press Inverter Turbo Defrost
pad.
2. Set the weight for 1 lb by press-
ing Number pads.
1 lb = 1 0
3. Press Start Pad.
4. Press Stop/Reset Pad twice.
Oven shuts off.
4. Inverter Auto Cooking
OPERATION
1. Press Rice pad twice.
2. Press Start pad.
Cooking begins as time counts
down.
3. When cooking time has elapsed,
oven beeps 5 times and shuts off.
5. Auto Cook
OPERATION
1. Press Auto Cook pad.
2. Press Number pads.
(Press 3 to select Bacon)
- 5 -
SCROLL DISPLAY
Time of day or colon if set appears
in the display.
SCROLL DISPLAY
1.0
4.23
Time of day or colon if set appears
in the display.
SCROLL DISPLAY
1
15.00
Time of day or colon if set appers in
the display.
SCROLL DISPLAY
3