Table of Contents
Advertisement
NN-G463 / NN-S443 / NN-S423 / NN-S413 / NN-413
3 OPERATION AND DIGITAL PROGRAMMER CIRCUIT
TEST PROCEDURE (NN-G463)
3.1.
To set clock
OPERATION
1. Plug the power supply cord
into wall outlet.
2. Press Clock
pad.
3. Enter time of day (TOD) by
pressing appropriate Number
pads.
4. Press Clock
pad. TOD has
now been resistered into the
digital programmer circuit and will
count up by minutes.
3.2.
Time cooking for two stage
OPERATION
1. Place a water load in the oven.
2. Press Power Level
pad
once to set High power.
(1st stage)
3. Set for 5 seconds by
pressing Number
pads.
5 Sec.= 5
4. Press Power Level
pad 6
times to set Medium power.
(2nd stage)
5. Set for 1 minute by pressing
Number pads.
1 Min.= 1
0
0
6. Press Start pad.
7. When 1st stage cooking time
has elapsed. Oven beeps twice
and automatically switches to 2nd
stage cooking.
8. When 2nd stage cooking time
has elapsed, oven beeps 5 times
and shuts off.
SCROLL DISPLAY
BEFORE USE REFER TO
OPERATING INSTRUCTIONS
SCROLL DISPLAY
Time of day or colon if set appears
in the display
3.3.
Inverter turbo defrost
OPERATION
1. Press
Inverter Turbo Defrost Pad.
2. Set the weight for 1 lb by
pressing Number
pads.
1 Ib= 1
0
3. Press Start pad.
4. Press Stop/Reset
Pad
twice.Oven shuts off.
3.4.
Auto Brown Cook (Example to
cook 6 oz Pizza)
OPERATION
1. Place brown dish on glass
tray, and press Preheat
pad.
2. Press Start pad.
3. When preheat time has
elapsed, a long beep will be
heard every 11 seconds for a
time frame of 3 minutes.
4. Open the door, and carefully
place food into the brown dish,
then close the door.
5. Press Pizza pad once for 6
oz serving.
(select 6, 9, 15oz)
6. Press Start pad.
When cooking time has elapsed,
Oven beeps 5 times and shuts
off.
6
SCROLL DISPLAY
Time of day or colon if set appears
in the display
SCROLL DISPLAY
Time in the display window will
count down.
Time of day or colon if set appears
in the display.
Time of day or colon if set appears
in the display.
Advertisement
Table of Contents
Troubleshooting
