Yamaha RCX Series User Manual page 62

1. Profile
Device No.
RX(n+3)8
to SO(70) to SO(77): General-purpose output
RX(n+3)F
RX(n+4)0
to SO(100) to SO(107): General-purpose output
RX(n+4)7
RX(n+4)8
to SO(110) to SO(117): General-purpose output
RX(n+4)F
RX(n+5)0
Chapter to SO(120) to SO(127): General-purpose output
5
RX(n+5)7
RX(n+5)8
to SO(130) to SO(137): General-purpose output
RX(n+5)F
RX(n+6)0
to SO(140) to SO(147): General-purpose output
RX(n+6)7
RX(n+6)8
to SO(150) to SO(157): General-purpose output
RX(n+6)F
RX(n+7)0
RX(n+7)1
RX(n+7)2
RX(n+7)3
Reserved
RX(n+7)4
RX(n+7)5
RX(n+7)6
RX(n+7)7
RX(n+7)8 Initial data process request flag
RX(n+7)9
Not used
RX(n+7)A
RX(n+7)B Remote ready
RX(n+7)C
Reserved
RX(n+7)D
RX(n+7)E
(Reserved: QnA)
RX(n+7)F
*1: Step execution input (SI(03)) and battery alarm output (SO(15)) are only supported by the RCX221/222
series.
*2: Used in YC-Link only when RCX141 or RCX221 is used with SR1-X.
*3: Used in YC-Link only when RCX142 or RCX222 is used with SR1-P.
*4: Used as the output ports of area check results when the area check output function is used.
5-2
Remote → Master
Signal name Device No.
RY(n+3)8
to SI(70) to SI(77): General-purpose input
RY(n+3)F
RY(n+4)0
to SI(100) to SI(107): General-purpose input
RY(n+4)7
RY(n+4)8
to SI(110) to SI(117): General-purpose input
RY(n+4)F
RY(n+5)0
to SI(120) to SI(127): General-purpose input
RY(n+5)7
RY(n+5)8
to SI(130) to SI(137): General-purpose input
RY(n+5)F
RY(n+6)0
to SI(140) to SI(147): General-purpose input
RY(n+6)7
RY(n+6)8
to SI(150) to SI(157): General-purpose input
RY(n+6)F
RY(n+7)0
RY(n+7)1
RY(n+7)2
RY(n+7)3
Reserved
RY(n+7)4
RY(n+7)5
RY(n+7)6
RY(n+7)7
RY(n+7)8 Initial data process complete flag
RY(n+7)9
Not used
RY(n+7)A
RY(n+7)B
RY(n+7)C Reserved
RY(n+7)D
RY(n+7)E
(Reserved: QnA)
RY(n+7)F
n: Address assigned to master module with station No. setting
Master → Remote
Signal name