Setting The End Time - Siemens HK9R3A250M Instruction Manual

Time-setting options
en
Use the or button to set the cooking time.
A @
3.
The appliance starts to heat up after a few seconds. The
cooking time counts down in the display.
The cooking time has elapsed
An audible signal will sound. The appliance will stop
heating. The cooking time will be zero on the display.
Once the signal stops, you can touch the
set a new cooking time.
Once your food is cooked, turn the function selector to
the "Off" position to switch the appliance off.
Changing and cancelling
You can use the or
A @
time at any time.After a few seconds, the change will be
applied.
To cancel, use the button to reset the cooking time all
A
the way to zero. The appliance will continue heating
without a cooking time.

Setting the end time

You can delay the time at which cooking is due to
finish. You can, for example, put your food in the
cooking compartment in the morning and set the
cooking time so that it is ready at lunch time.
Notes
Make sure that food is not left in the cooking
■
compartment for too long as it may spoil.
Do not adjust the end time once the appliance is
■
already in operation. Otherwise the cooking result
may no longer be satisfactory.
The end time cannot be set for types of heating with
■
grill function.
The end of the cooking time can be delayed by up to
23 hours 59 minutes.
Example in the picture: The time is 10.30 a.m., a
cooking time of 45 minutes has been set and you want
the food to be ready at 12.30 p.m.
Setting the heating function and temperature or
1.
setting
Press the button and use the
v
2.
the cooking time.
Touch the button again.
v
3.
The end time y is highlighted in the display.
18
button to
@
button to change the cooking
button or
A
Use the
4.
The appliance applies the settings after a few seconds.
The end time is shown in the display. Once the
appliance starts, the cooking time begins to count
down.
The cooking time has elapsed
An audible signal will sound. The appliance will stop
heating. The cooking time will be zero on the display.
Once the signal stops, you can touch the
set a new cooking time.
Once your food is cooked, turn the function selector to
the "Off" position to switch the appliance off.
Changing and cancelling
You can use the
After a few seconds, the change will be applied. The
end time cannot be changed once the cooking time has
already started to count down. Otherwise the cooking
result would no longer be satisfactory.
To cancel, use the
way back to the current time plus the cooking time. The
appliance will start to heat and the cooking time will
start to count down.
to set
@
or button to delay the end time.
@ A
or button to change the end time.
A @
button to set the end time all the
A
button to
@