Step 1: Assembly Instructions; Step 2: Finalizing Assembly - modway EEI-3432 Quick Start Manual

EEI-3432 CHAIR
STEP 1:
1. Please put Chair Body (1) upside down on a carpeted or padded surface.
2. Attach Chair Base (2) to Chair Body (1) by using 4 pieces of Bolts (A) and 4 pieces of Spring Washers (B)
with the wider part of Chair Base (2) in front of Chair Body (1) as shown.
(Note: the wider side is the front of the chair, the narrower side is the back of the chair.)
3. Use Allen Wrench (C) to tighten all Bolts (A) clockwise as shown.
STEP 2:
Carefully turn over the assembled chair and smooth the fabric cover to be good looking.
Note: The fabric cover is washable and fixed by velcro, please insert the fabric cover into seat and smooth it
again after wash it.
Assembly is complete. Your Chair is ready to enjoy now!
Customer Service 609-256-9000︱www.modway.com
Page 2 of 2