Basic Settings; Overview Of Basic Settings - Bosch SMD6ZCX60G User Manual

Basic settings

Basic settings
You can configure the appliance to meet your needs.
Basic settings

Overview of basic settings

The basic settings depend on the features of your appliance.
Basic setting
Water hardness
Rinse aid dispensing
Sensor setting
Extra Dry
TimeLight
1
Factory setting (may vary according to model)
Display text Selection
1
H:04 H:00 - H:07
1
r:05 r:00 - r:06
1
SE:00 SE:00 - SE:02
1
d:00 d:00 - d:01
1
S:01 S:00 - S:01
Basic settings en
Description
Set the water softening system to
your water hardness.
→ "Setting the water softening sys-
tem", Page 27
Level H:00 switches the water
softening system off.
Set the amount of rinse aid to be dis-
pensed.
→ "Setting the amount of rinse aid",
Page 30
Switch the rinse aid system off with
level r:00.
Set the water sensor for identifying
soiling.
→ "Sensors", Page 12
The temperature is increased during
the final rinse, which improves the
drying result. This may increase the
run time slightly.
Note: Not suitable for delicate items
of tableware.
Switch Extra Dry on "d:01" or off
"d:00".
Switch TimeLight on or off.
While the programme is running,
status information is projected onto
the floor below the appliance door
relating to timer programming, the
programme or the time remaining. If
the base panel is pulled forwards or
if the appliance is installed at eye
level with the cabinet front fitted
flush, the display is not visible.
Level "S:00" switches TimeLight off.
37