Table of Contents
Advertisement
Quick Links
Advertisement
Table of Contents
Subscribe to Our Youtube Channel
Related Manuals for Bosch SMD6ECX57E
Summary of Contents for Bosch SMD6ECX57E
- Page 1 Dishwasher SMD6ECX57E [en] User manual...
-
Page 2: Table Of Contents
Table of contents Safety .......... 4 Features......... 22 General information...... 4 Top basket ........ 22 Intended use........ 4 Bottom basket ........ 23 Restriction on user group.... 4 Cutlery drawer ........ 23 Safe installation ........ 4 Etagere ........... 24 Safe use ........... 6 Folding prongs ....... 24 Damaged appliance ...... 7 Extra Clean Zone ...... 24 Risk to children ........ 8 Basket heights........ 25... - Page 3 Setting a programme ..... 35 Transporting the appliance .... 61 Setting additional functions .... 35 Disposing of old appliance .... 61 Setting timer programming .... 35 Customer Service...... 61 Starting the programme .... 35 Product number (E-Nr.), produc- Interrupting programme .... 35 tion number (FD) and consecut- Terminate programme.... 36 ive numbering (Z-Nr.) ..... 62 Switching off appliance .... 36...
-
Page 4: Safety
en Safety Safety Observe the following safety instructions. General information ¡ Read this instruction manual carefully. ¡ Keep the instruction manual and the product information safe for future reference or for the next owner. ¡ Do not connect the appliance if it has been damaged in transit. Intended use Only use this appliance: ¡... - Page 5 Safety en WARNING ‒ Risk of electric shock! ¡ Incorrect installation is dangerous. ▶ Connect and operate the appliance only in accordance with the specifications on the rating plate. ▶ Always use the supplied power cable for the new appliance. ▶ Connect the appliance to a power supply with alternating current only via a properly installed socket with earthing.
-
Page 6: Safe Use
en Safety WARNING ‒ Risk of injury! Hinges move when opening and closing the appliance door and can cause injury. ▶ If built-under or integrable appliances are not in a cavity so that one side is accessible, the hinge area must be covered at the side. -
Page 7: Damaged Appliance
Safety en WARNING ‒ Risk of injury! ¡ Leaving the appliance door open may result in injury. ▶ Only open the appliance door to load or unload tableware in order to prevent accidents, e.g. through tripping. ▶ Do not sit or stand on the appliance door when open. ¡... -
Page 8: Risk To Children
en Safety ▶ Never operate an appliance with a cracked or fractured sur- face. ▶ Never pull on the power cord to unplug the appliance. Al- ways unplug the appliance at the mains. ▶ If the appliance or the power cord is damaged, immediately unplug the power cord or switch off the fuse in the fuse box and turn off the water tap. -
Page 9: Safety Systems
Safety en WARNING ‒ Risk of harm to health! Children can lock themselves in the appliance, thereby putting their lives at risk. ▶ With redundant appliances, unplug the power cord. Then cut through the cord and damage the lock on the appliance door beyond repair so that the appliance door will no longer close. -
Page 10: Preventing Material Damage
en Preventing material damage Only use the water hoses sup- ▶ Preventing material damage Preventing material dam- plied with the appliance or genu- ine spare hoses. Never re-use water hoses that ▶ have been used before. Preventing material damage Safe installation ¡... -
Page 11: Childproof Lock
Childproof lock en So as not to scratch the finish ▶ Environmental protection and saving energy Environmental protection on the appliance, do not use sponges with a rough surface or and saving energy abrasive cleaning agents. To prevent corrosion, do not use Environmental protection and saving energy ▶... -
Page 12: Sensors
en Installation and connection the temperature and run time are ad- Efficient Dry ditionally adjusted to the level of soil- The appliance door opens automatic- ing. ally during the drying phase. This en- sures a particularly economical dry- Sensors ing result. The sensors adjust the programme For best drying results wait until the sequence and strength in the auto-... -
Page 13: Installing And Connecting The Appliance
Installation and connection en ¡ Quick reference guide Connect the wastewater hose to the outlet connection of the siphon Installing and connecting the using the enclosed parts. When doing so, check that the appliance wastewater hose is not kinked, You can position your built-under or crushed or twisted. - Page 14 en Installation and connection ¡ Please note that the water safety system is only functional if there is a power supply. Insert the non-heating appliance plug of the power cable into the appliance. Insert the mains plug of the appli- ance into a nearby socket. The connection data for the appli- ance can be found on the rating plate.
-
Page 15: Familiarising Yourself With Your Appliance
Familiarising yourself with your appliance en Familiarising yourself with your appliance Familiarising yourself with your appliance Familiarising yourself with your appliance Appliance You can find an overview of the parts of your appliance here. Rating plate Rating plate with "E number and FD number" → Page 62. -
Page 16: Controls
en Familiarising yourself with your appliance "Detergent" → Page 30 is added to the detergent Detergent dispenser dispenser. "Bottom basket" → Page 23 Bottom basket Dispenser for special salt Add the special salt to the dispenser for special salt. → "Water softening system", Page 26 Lower spray arm The lower spray arm washes the tableware in the bot- tom basket. - Page 17 Familiarising yourself with your appliance en "Switching on the appliance" → Page 34 ON/OFF button and reset button "Switching off the appliance" → Page 36 "Terminating the programme" → Page 36 "Programmes" → Page 19 Programme buttons Display The display shows information about the remain- ing running time or the basic settings. You can change the basic settings via the display and the setting buttons.
- Page 18 en Familiarising yourself with your appliance button If you press for approx. 3 seconds, you can open the basic settings. → "Changing basic settings", Page 40 Depending on the appliance specifications...
-
Page 19: Programmes
Programmes en Programmes Programmes You can find an overview of the pro- ning time will change if the rinse aid Programmes grammes that can be selected here. system is switched off or rinse aid Different programmes, which can be needs to be added. found on the control panel of your The consumption values can be appliance, are available depending... - Page 20 en Programmes Programme Programme sequence Additional func- tions Tableware: Reduced noise: → "Additional ¡ Cleaning mixed table- ¡ Pre-Rinse Silence 50 ware and cutlery. functions", ¡ Cleaning 50 °C Level of soiling: Page 21 ¡ Intermediate rinse ¡ Removing common ¡ Final rinse 63 °C household food remnants ¡...
-
Page 21: Information For Test Institutes
Additional functions en flashes. Information for test institutes a The programme and the additional Test institutes are provided with in- function are saved. formation for comparability tests, e.g. Tip: To reset the programme, either according to EN60436. use the Home Connect app or reset These are the conditions for conduct- your appliance back to the factory ing the tests, however they are not... -
Page 22: Features
en Features Additional func- Features Features tion ¡ Switch on with mixed You can find an overview of the pos- Features loads containing table- sible features of your appliance and IntensiveZone ware with different soil- how to use them here. ing levels, e.g. place These features depend on the model very soiled pots and of your appliance. -
Page 23: Bottom Basket
Features en Press in the levers on the right and Bottom basket left on the outside of the basket. Arrange pans and plates in the bot- tom basket. The basket can then slip down slightly. Raise or lower the basket evenly to Large plates up to a diameter of the right level. -
Page 24: Etagere
en Features Arrange cutlery with the points and Folding down prongs sharp edges downwards. If you do not need the prongs, fold them down. Etagere Push the lever forwards and fold Use the cutlery shelf and space un- down the prongs ... -
Page 25: Basket Heights
Features en Set the slider to ON or OFF. Pull the tab on the Extra Clean Zone up and forwards . Push in the top basket. Set the slider to ON. Cleaning Extra Clean Zone Clean under running water. Limescale and soiling from the dish- Place the Extra Clean Zone in the washing water can block the nozzles. -
Page 26: Before Using For The First Time
en Before using for the first time "Set the amount of rinse aid to be Before using for the first time Before using for the dispensed." → Page 29 first time "Add detergent" → Page 30. Start the Programme with the Configure the settings for initial start- Before using for the first time highest cleaning temperature without tableware. -
Page 27: Setting The Water Softening System
Water softening system en Water hardness °E Hardness range mmol/l Setting value 39 - 62 Hard 5.5 - 8.9 H:07 Note: Set the water hardness determ- ter hardness: the higher the water ined on your appliance. hardness, the greater the amount of → "Setting the water softening sys- special salt required. -
Page 28: Switching Off The Water Softening System
en Water softening system Note: Only use special salt for erally only be used up to a water dishwashers. hardness of 26 °E without adding Do not use salt tablets. special salt. Do not use table salt. ¡ The water hardness is 0 - 8 °E. You do not need to use special Add the special salt to the dis- salt. -
Page 29: Rinse Aid System
Rinse aid system en Add rinse aid up to the max mark. Additional water consumption in litres Additional power consumption in 0.05 The consumption values specified are laboratory measurements determ- ined in accordance with the currently applicable standard and using the Eco 50°... -
Page 30: Switching The Rinse Aid System Off
en Detergent To save the settings, press Modern, powerful detergents mainly for 3 seconds. use a low-alkaline formulation with enzymes. Enzymes break down starch and remove protein. Oxygen- Switching the rinse aid sys- based bleaching agents are generally tem off used to remove coloured marks, e.g. tea or ketchup. -
Page 31: Unsuitable Detergents
Detergent en Tip: Suitable detergents are available Unsuitable detergents online via our website or from "Cus- Do not use detergent which could tomer Service" → Page 61. cause damage to the appliance or Separate detergents present a risk to health. Separate detergents are products Detergent Description that do not contain components other... -
Page 32: Adding Detergent
en Tableware ¡ The function of rinse aid is limited Close the lid of the detergent dis- with combined detergents. You will penser. generally get better results using rinse aid. ¡ Use tablets with a special drying performance. Adding detergent To open the detergent dispenser, press the locking latch. -
Page 33: Damage To Glass And Tableware
Tableware en Damage to glass and table- Cause Recommendation ware The water temperat- Select a programme ure of the programme with lower temperat- Avoid damage to glass and table- is too high. ures. ware. After the programme has ended, take glass- Cause Recommendation ware and cutlery out... -
Page 34: Removing Tableware
en Basic operation To save resources, do not pre- Removing tableware rinse tableware under running wa- ter. WARNING Observe the following when arran- Risk of injury! ging tableware: Hot tableware can cause burns to the – Put heavily soiled tableware in skin. -
Page 35: Setting A Programme
Basic operation en cient programme for the combina- to set the re- tion of energy/water consumption quired start time for the pro- for this type of tableware and evid- gramme. ences conformity with the EU Eco- Press ... -
Page 36: Terminate Programme
en Basic operation Press to resume the pro- gramme. Terminate programme To end a programme early or to switch from a programme that has already started, you will need to can- cel it first. Open the appliance door. Press for approx. 4 seconds. -
Page 37: Basic Settings
Basic settings en Basic settings Basic settings You can configure the appliance to meet your needs. Basic settings Overview of basic settings The basic settings depend on the features of your appliance. Basic setting Display text Selection Description Water hardness H:04 H:00 - H:07 Set the water softening system to your water hardness. - Page 38 en Basic settings Basic setting Display text Selection Description TimeLight S:01 S:00 - S:01 Switch TimeLight on or off. While the programme is running, status information is projected onto the floor below the appliance door relating to timer programming, the programme or the time remaining. If the base panel is pulled forwards or if the appliance is installed at eye level with the cabinet front fitted...
- Page 39 Basic settings en Basic setting Display text Selection Description Efficient Dry o:02 o:00 - o:02 Activate or deactivate automatic opening of the appliance door during the drying phase. If the function has been activated, the running time may increase. The following settings are possible: ¡...
-
Page 40: Changing Basic Settings
en Home Connect Tips Changing basic settings ¡ Please consult the documents sup- Open the appliance door. plied by Home Connect. Press . ¡ Please also follow the instructions in the Home Connect app. To open the basic settings, press for 3 seconds. Note: Please note the safety precau- a The display shows H:xx. -
Page 41: Home Connect Settings
Home Connect en With the help of the Home Connect Press . ▶ App scan the QR code. If you open the appliance door, the function is automatically deactiv- ated. button lights up. Tip: To deactivate the function, press . Remote Diagnostics Follow the instructions in the Customer Service can use Remote Home Connect app. -
Page 42: Cleaning And Servicing
Dishwasher Care and Ma- ance to malfunction. To avoid such chine Cleaner for Dishwashers online faults and reduce odours, we recom- at https://www.bosch-home.com/ mend cleaning your appliance at reg- store or from customer service. ular intervals. Machine Care is a programme which... - Page 43 Cleaning and servicing en Phase Removal of Detergent Placement Grease and limescale Liquid machine care product Appliance interior, e.g. bottle or machine descaler in hung in the cutlery basket or powder form. powder in the interior. Food remnants and de- Machine cleaner Detergent dispenser posits To ensure optimum cleaning perform-...
-
Page 44: Filter System
en Cleaning and servicing Pull down the micro filter to re- Filter system move. The filter system removes coarse soiling from the dishwashing cycle. Press the locking catches gether and lift the coarse filter out . Micro filter Fine filter Coarse filter Cleaning filters Soiling in the dishwashing water may... -
Page 45: Cleaning Spray Arms
Cleaning and servicing en Cleaning spray arms Limescale and soiling in the dish- washing water may block the nozzles and bearings on the spray arms. Clean the spray arms regularly. Unscrew the upper spray arm and pull down to remove . Pull up the lower spray arm to re- move. -
Page 46: Troubleshooting
en Troubleshooting Troubleshooting Troubleshooting You can rectify minor faults on your appliance yourself. Read the troubleshoot- Troubleshooting ing information before contacting after-sales service. This will avoid unneces- sary costs. WARNING Risk of electric shock! Incorrect repairs are dangerous. Repairs to the appliance should only be carried out by trained specialist ▶... - Page 47 Troubleshooting en Fault Cause Troubleshooting Appliance door opens too Door is not correctly adjus- Adjust the appliance door as de- ▶ wide at the end of the pro- ted. scribed in the installation instruc- gramme. tions. The door gap must be at least 70 mm - 100 mm.
-
Page 48: Error Code / Fault Display / Signal
en Troubleshooting Error code / Fault display / Signal Fault Cause Troubleshooting E:20-60 lights up alternately. Appliance has detected cal- Descale the appliance. cified heating element. Operate the appliance with the wa- ter softening system. E:30-00 will light up altern- Water protection system is Turn off the water tap. - Page 49 Troubleshooting en Fault Cause Troubleshooting E:32-00 will light up altern- Screw the water connection back ately or indicator for water supply lights up. Check the water connection for leaks. Restore the power supply. Switch the appliance on. E:92-40 will light up altern- Filters are soiled or blocked.
-
Page 50: Washing Results
en Troubleshooting Fault Cause Troubleshooting A different error code ap- A technical fault is present. Press . pears in the display window. Unplug the appliance or switch off the fuse. E:01-00 to E:90-10 Wait at least 2 minutes. Insert the mains plug of the appli- ance in a socket or switch on the fuse. - Page 51 Troubleshooting en Fault Cause Troubleshooting Tableware is not dry. Use a different combined detergent with a better drying performance. Extra Dry not activated to im- Activate Extra Dry. ▶ prove drying performance. Tableware removed too Wait until the programme ends. early or drying process not Only remove tableware 30 minutes yet ended.
- Page 52 en Troubleshooting Fault Cause Troubleshooting Remnants of food on table- Filters are soiled. Clean the filters. ▶ → "Cleaning filters", Page 44 ware. Filters are inserted incor- Insert the filters properly. → "Filter system", Page 44 rectly and/or not engaged. Engage the filters. Washing programme selec- Select a more intensive washing ▶...
- Page 53 Troubleshooting en Fault Cause Troubleshooting Water marks on plastic Due to laws of physics Select a more intensive pro- ▶ parts. droplet formation on plastic gramme. → "Programmes", Page 19 surfaces is unavoidable. After drying water marks are Position tableware at an angle. ▶...
- Page 54 en Troubleshooting Fault Cause Troubleshooting Tea residue or lipstick marks Washing temperature is too Select a programme with a higher ▶ on tableware. low. washing temperature. → "Programmes", Page 19 Too little detergent is being Use a suitable "Detergent " ▶ → Page 30 and follow the manufac- used or is unsuitable.
- Page 55 Troubleshooting en Fault Cause Troubleshooting Plastic parts are discol- Washing temperature is too Select a programme with a higher ▶ oured. low. washing temperature. → "Programmes", Page 19 Tableware has been pre- Only remove large remnants of food ▶ cleaned too intensely. The and do not prerinse tableware.
-
Page 56: Home Connect Problem
en Troubleshooting Fault Cause Troubleshooting Rust spots on cutlery. Cutlery is not sufficiently Use rust-resistant tableware. ▶ rust-resistant. Knife blades are often more severely af- fected. Cutlery may also rust if Do not wash rusting items. ▶ washed together with rust- ing items. -
Page 57: Information On Display Panel
Troubleshooting en Information on display panel Fault Cause Troubleshooting Add "Special salt" → Page 27. Special salt refill indicator Insufficient special salt. ▶ lights up. Sensor does not detect spe- Do not use special salt tablets. ▶ cial salt tablets. Refill indicator for special Water softening system is Setting the water softening system ▶... -
Page 58: Mechanical Damage
en Troubleshooting Fault Cause Troubleshooting → "Terminate programme", Programme starts automat- You did not wait until pro- ▶ ically. gramme ended. Page 36 Appliance stops during the Appliance door is not closed Close the appliance door. ▶ programme or cuts out. properly. Power and/or water supply Check the power supply. - Page 59 Troubleshooting en Fault Cause Troubleshooting Knocking or rattling noise. With a small load the water Distribute the tableware evenly. ▶ jets directly strike against Load the appliance with more table- ▶ the tub. ware. Light items of tableware Position light items of tableware se- ▶...
-
Page 60: Clean Wastewater Pump
en Transportation, storage and disposal Insert the pump cover and press Clean wastewater pump down . Large remnants of food or foreign bodies can block the waste water pump. As soon as the rinsing water no longer drains properly, the waste water pump must be cleaned. -
Page 61: Protect Appliance From Frost
Customer Service en Protect appliance from frost Disposing of old appliance If there is a risk of frost where the ap- Valuable raw materials can be re- pliance will be standing, e.g. in a holi- used by recycling. day home, empty the appliance com- pletely. -
Page 62: Product Number (E-Nr.), Produc- Tion Number (Fd) And Consecut- Ive Numbering (Z-Nr.)
en Technical specifications least 10 years from the date on from water damage, the appliance which your appliance was placed on must be connected to the power the market within the European Eco- supply. nomic Area. ¡ The liability guarantee is valid for the service life of the appliance. -
Page 63: Information Regarding Free And Open Source Software
The model Declaration of Conformity identifier is made up of the charac- Robert Bosch Hausgeräte GmbH ters before the slash in the product hereby declares that the appliance number (E-Nr.) on the rating plate. Al-... - Page 64 2014/53/EU. 2.4 GHz band: 100 mW max. A detailed RED Declaration of Con- 5 GHz band: 100 mW max. formity can be found online at www.bosch-home.com among the additional documents on the product page for your appliance. 5 GHz WLAN (Wi-Fi): For indoor use only.
- Page 68 Expert advice for your Bosch home appliances, help with problems or a repair from Bosch experts. Find out everything about the many ways Bosch can support you: www.bosch-home.com/service Contact data of all countries are listed in the attached service direct- ory.
Need help?
Do you have a question about the SMD6ECX57E and is the answer not in the manual?
Questions and answers