Changhong Electric LED28C2200DS Operation Manual page 15

Menu Operation
* When TV signals is Cable.
• Auto Tuning
Select the ENTER button to start Auto
Tuning.
1. Adjust the Cable Scan Menu.
Scan type: Scans for all active broadcast
station channels and stores them in the T
If you select Quick Scan, you can set up
the Frequency, Network ID and Symbol (Ks/s) manually
by pressing the button on the remote control. Quick
Scan can only search DVBC digital programmes, c
not search for ATV programmes.
If you select Full Scan, the Auto Tuning will search
through all or appointed frequencies to find available
channels.
Frequency: Enter a user-defined frequency. (Differs in
each country)
Network ID (Auto/Manual): Selects the Network ID
setting mode among Auto or Manual. When Network
is Manual, you can set up Network ID using the
numeric bu ttons.
Symbol (Ks/s): Selects the Symbol (ks/s) setting
mode among Auto or Manual. When Symbol (ks/s) is
Manual, you can set up Symbol (ks/s) using the
numeric buttons.
When you are satisfied with your setting, press
ENTER button.
2. Select the country and tune type for channels.
3. The TV will begin memorizing all of the available
channels.
• CADTV Manual Tuning
Frequency, Symbol (ks/s), and QAM Type are needed in order to add a programme
correctly in DVB cable mode. Please inquire of the cable service provider about the
correct values.
• ATV Manual Tuning
Manual store for ATV channels.
Press the▲/▼ button to select items.
Press the ◄/► button to adjust it.
Press the red button to save it.
Press the EXIT to exit.
V.
an
13