Chapter 4 Mib Navigator; Introduction - Cabletron Systems LANVIEWsecure User Manual

4.1 Introduction

This chapter explains how to use the MIB Navigator utility commands of get, set, and community names for
LANVIEW
. Figure 4-1 shows the MIB Navigator screen.
SECURE
NOTE: Figure 4-1 shows the MIB Navigator screen that would be presented after the user entered the "help"
command.
Event Message Line
MIBNav-> help
MIBNav->
CHAPTER 4
MIB NAVIGATOR
Welcome to Cabletron NBR-SERIES Revision XX.XX.XX
Commands Available to the User:
arp branch cd
ctron defroute dir
done exit get
help ls mib2
netstat next ping
pwd quit set
show snmpbranch snmpget
snmpset snmptree su
traceroute tree whoami
SPECIAL:
done, quit, or exit - Exit from the MIB Navigator.
mib2 - Change MIB directory to MIB II (1.3.6.1.2.1).
ctron - Change MIB directory to cabletron (1.3.6.1.4.1.52).
For help with a specific command, type 'help <command>'.
Figure 4-1 The MIB Navigator Screen
1110-16
4-1