Cabletron Systems LANVIEWsecure User Manual page 19

rptrPortSrcAddrTopoState
Description:
Object Identifier:
Data Type:
Values:
Access Policy:
rptrPortSrcAddrForceTrunk
Description:
Object Identifier:
Data Type:
Values:
Access Policy:
rptrPortSaTrapSetSrcaddr
Description:
Object Identifier:
Data Type:
Values:
Access Policy:
rptrPortSecurityPortGrpId
Description:
Object Identifier:
Data Type:
Access Policy:
{rptrPortSrcAddrEntry 3}
Returns the topological state of the port. NOTE: Not related to security.
1.3.6.1.4.1.52.4.1.1.1.4.3.5.1.3.b.p
Integer
1 station
2 trunk
read-only
{rptrPortSrcAddrEntry 4}
When this object is set to Force it causes the port to be placed into a Trunk
topological state whether the network traffic would warrant such a state or not.
When this object is set to noForce it allows the port to assume the topological
state it would naturally assume based on the network activity across it. When
read, this object reports the current setting. NOTE: Not related to security.
1.3.6.1.4.1.52.4.1.1.1.4.3.5.1.4.b.p
Integer
1 noForce
2 force
read-write
{rptrPortSaTrapEntry 3}
Enables and disables source address traps for this port.
1.3.6.1.4.1.52.4.1.1.1.4.3.8.2.1.1.3
Integer
1 disable
2 enable
read-write
{rptrPortSecurityEntry 1}
Port Group ID for this source address lock entry.
1.3.6.1.4.1.52.4.1.1.1.4.3.9.1.1.1.b.p
Integer
read-only
2-5