Installation; Ac Power Cord Retainer System - Atlas AP-S15LA Owner's Manual

AP-S15LA
Owner's Manual
AC Power Conditioner & Distribution Unit

Installation

Before installing, read the entire manual to ensure proper understanding of operation and that all features are being utilized. The
AP-S15LA can be placed on a shelf or rack mounted in a standard 19" width rack. When rack mounted, placement within the rack is
flexible, however the AP-S15LA should be within 6' of a dedicated 15A AC outlet. When rack mounting, use rack rail type screws of
⁄ " x 1". Always make sure the 15A outlet is properly inspected by a certified electrician prior to connecting the AP-S15LA. Make sure to
10
32
inspect the equipment that will be connected to the AP-S15LA to ensure it does not exceed 15A total amperage draw.

AC Power Cord Retainer System

Connect the IEC 14 Gauge 12' (4m) power cord to a 15A 120VAC outlet to provide power to the AP-S15LA by aligning the pins of the
cord to the pins on the chassis and inserting the cord. Press firmly to assure a good connection.
The AP-S15LA incorporates an IEC Power Cord retainer bracket to prevent the cord from coming loose. To install the IEC power cord
retainer bracket, remove the two screws from the chassis of the AP-S15LA, place the retainer bracket over the cord and insert the two
screws through the bracket into the chassis as illustrated below.
1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.
Telephone: 800.876.3333 • Fax: 800.765.3435
– 9 – AtlasSound.com
Specifications are subject to change without notice.