Page 1
Owner’s Manual AP-C15D Power Conditioner High Power Wiring Breaker Abnormal Fault Open Fault Voltage AP-C15D Power Conditioner Circuit Unswitched Outlets 120V 10A Power AC Mains Voltage Breaker High Current Unswitched Filtered Outlets 120V, 60Hz, 10A MAX, 1200W Lamp 120V 10A, Unfiltered...
Owner’s Manual AP-C15D Power Conditioner Safety Instructions The lightning flash with arrowhead symbol within an CAUTION equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage “ within the RISK OF ELECTRIC SHOCK fier product’s enclosure that may be of sufficient magnitude DO NOT OPEN to constitute a risk of electric shock to persons.
Page 4
Should any of the following irregularities occur during use, immediately switch off the power, disconnect the power cord from the AC outlet and contact Atlas Sound. Do not to attempt to continue operation with the product as this may cause fire or electric shock: •...
AC power distribution and equipment power protection. The 15A compact 1 RU unit AC Mains Voltage can be moni- tored via the front panel from the precision Digital Volt Meter. To light your rack, the AP-C15D has incorporated a front panel pull-out dimmable LED tube light.
Applications The AP-C15D was designed to be flexible with features that allow it to be used in a variety of applications. The AP-C15D can be used solely for protection against lightning strikes or voltage surges or for AC Mains Voltage Monitoring. If fuzzy video or frequent static pops occur, the AC power conditioning will eliminate or reduce those inconveniences.
Page 7
High AC Line Mains – The Abnormal Voltage LED will flash between 128VAC – 132VAC indicating possible damage may occur to equipment due to high AC Mains voltage. The AP-C15D outlets will remain active but the LED will stay flashing even if the voltage returns to a normal operating range.
Before installing we strongly suggest you read the entire manual to ensure you benefit from all the features of the AP-C15D. The AP-C15D can be placed on a shelf or rack mounted in a standard 19" width rack. Placement within a rack is not critical but the rack should be within 6' of a dedicated 15A AC outlet.
Action Needed: If this happens, the AP-C15D will shut off and the unit will need to be repaired or replaced. It is important to have all equipment that was connected to that AC Mains Line inspected for proper operation.
AP-C15D Power Conditioner Owner’s Manual Specifications Type Power Conditioner & Suppressor Load Rating Front Panel Outlets 2 Unswitched Lights 1 Pull Out LED with Dimmer Switch Activation Switch Rocker Circuit Breaker 15A Resettable AC Mains Voltmeter Three Digits, Digital Indicators...
Page 11
Owner’s Manual AP-C15D Power Conditioner Notes 1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A. Telephone: 800.876.3333 • Fax: 800.765.3435 – 11 – AtlasSound.com Specifications are subject to change without notice.
The original sales invoice should be retained as evidence of purchase under the terms of this warranty. All warranty returns must comply with our returns policy set forth below. When products returned to Atlas Sound do not qualify for repair or replace- ment under our warranty, repairs may be performed at prevailing costs for material and labor unless there is included with the returned product(s) a written request for an estimate of repair costs before any non-warranty work is performed.
Need help?
Do you have a question about the AP-C15D and is the answer not in the manual?
Questions and answers