Table of Contents
Advertisement
Quick Links
AP-S20RT
Owner's Manual
AC Distribution & Suppressor Unit
AP-S20RT
AC Power Distribution &
AC Suppressor Unit with Remote Activation
1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A.
Telephone: 800.876.3333 • Fax: 800.765.3435
– 1 –
AtlasSound.com
Specifications are subject to change without notice.
Advertisement
Table of Contents
Related Manuals for Atlas AP-S20RT
Summary of Contents for Atlas AP-S20RT
- Page 1 AP-S20RT Owner’s Manual AC Distribution & Suppressor Unit AP-S20RT AC Power Distribution & AC Suppressor Unit with Remote Activation 1601 Jack McKay Blvd. • Ennis, Texas 75119 U.S.A. Telephone: 800.876.3333 • Fax: 800.765.3435 – 1 – AtlasSound.com Specifications are subject to change without notice.
-
Page 2: Table Of Contents
AP-S20RT Owner’s Manual AC Distribution & Suppressor Unit Table of Contents Important Safety Instructions ........................3 Introduction ............................5 Key Features and Applications ....................... 6 Front Panel Description ........................... 7 Rear Panel Description ..........................8 Installation and Remote Turn On Configuration ..................9 AC Power Cord Retainer System ......................10... -
Page 3: Important Safety Instructions
AP-S20RT Owner’s Manual AC Distribution & Suppressor Unit Important Safety Instructions The lightning flash with arrowhead symbol within an equilateral triangle, is intended to alert the user to the presence of uninsulated “dangerous voltage “ within the product’s enclosure that may be of sufficient magnitude to constitute a risk of electric shock to persons. - Page 4 When The Device Is In Use • To prevent electric shock, do not remove the product cover as there are high voltage components inside. Refer all servicing to Atlas Sound. • Should any of the following irregularities occur during use, immediately switch off the power, disconnect the power cord from the AC outlet and contact Atlas Sound. Do not to attempt to continue operation with the product as this may cause fire or electric shock: • Smoke or strange smell coming from the unit. • If the product falls or the case is damaged.
-
Page 5: Introduction
The AP-S20RT’s circuitry is very fast and can suppress unwanted energy within a nanosecond response and sustain the suppression up to 2 milliseconds, thus ensuring virtually trouble-free protection. If damage to the suppression circuitry occurs, the AC fault LED will illuminate. -
Page 6: Key Features And Applications
The flexible AP-S20RT was designed with features to be used in a variety of applications. The AP-S20RT can be used solely for protection against voltage surges or for AC distribution. The AP-S20RT can also be used for power conditioning to eliminate or reduce fuzzy video or frequency audio static pops. The following are just a few examples of applications where the AP-S20RT can be used: • Restaurants... -
Page 7: Front Panel Description
The 20A rated breaker will open if the combined draw of all AC outlets exceeds 20A. Note: The breaker is designed to exceed its rating for a short period of time. If the breaker is tripped, you must first remove the load from the AP-S20RT and then push to reset. -
Page 8: Rear Panel Description
These six outlets are “Live” when the front panel power switch is activated. The two Unswitched Outlets are always live if the power cord is connected to 120VAC. 3. XLR Light Socket A 12VDC XLR light socket provides power for the optional AL -GNL18 light. 4. Light Socket Power Switch Two-position switch to power On/Off the XLR light socket. 5. Remote Activation There are two methods to remotely activate the AP-S20RT: A. External Switch - The Ext SW terminals are connected to a latching type dry contact closure to activate the AP-S20RT. Note: The Remote Bypass switch must be shorted for Remote Activation. This feature can be used for Emergency Power Down (EPD), when tied into a normally closed latching contact closure (e.g. Fire Panel). B. DC Voltage - When you apply 5V - 24VDC to the Ext SW terminals the unit will activate. See “Remote Activation Drawings” for details. The terminals marked “+12V” and “GND” can be connected to a remote panel LED (not included) to indicate function when remotely activated. -
Page 9: Installation And Remote Turn On Configuration
Owner’s Manual AC Distribution & Suppressor Unit Installation Before installing, it is recommended to read the entire manual to ensure proper operation and that all features are being utilized. The AP-S20RT can be placed on a shelf or rack mounted in a standard 19" width rack. When rack mounted, placement within the rack is flexible however the AP-S20RT should be within 6' of a dedicated 20A AC outlet. When rack mounting, use Rack Rail type screws of ⁄ " x 1". Always make sure the 20A outlet is properly inspected by a certified electrician prior to connecting the AP-S20RT. Make sure to inspect the equipment that will be connected to the AP-S20RT to ensure it does not exceed 20A total amperage draw. -
Page 10: Ac Power Cord Retainer System
2. Locate the AC wall outlet that will be used to power the needed in order to properly align it as shown in Figure 6. Atlas Power product. Remove the center screw securing the cover plate to the AC outlet. -
Page 11: Specifications
AP-S20RT Owner’s Manual AC Distribution & Suppressor Unit Specifications Type Power Conditioner & Suppressor Load Rating Safety Listings ETL (UL 60065 Standard) Front Panel Outlets 1 Unswitched USB Port 1 USB Charge/Light Port (5VDC, 1A) Activation Switch Rocker Circuit Breaker 2 0A Resettable Indicators AC Power On, AC Fault, EVS Protect Rear Panel AC Outlets 8 Outlets Total LED Light Socket X LR Socket to Provide 12VDC for Optional AL -GNL18 Gooseneck Lamp... -
Page 12: Warranty
PARTICULAR PURPOSE. Atlas Sound does not assume, or does it authorize any other person to assume or extend on its behalf, any other warranty, obligation, or liability. This warranty gives you specific legal rights and you may have other rights which vary from state to state.