Setting Up Your Oven; Installation And Connection - Belling BD28MBK Instruction Manual

SETTING UP YOUR OVEN

TURNTABLE INSTALLATIONS
Hub (underside)
Glass tray
Turntable shaft

INSTALLATION AND CONNECTION

1. This appliance is only intended for domestic use.
2. This oven is intended for built-in use only. It is not
intended for counter-top use or for use inside a
cupboard.
3. Please observe the special installation instructions.
4. The appliance can be installed in a 60cm wide
cabinet. Correct ventilation must be provided
5. The appliance is fitted with a plug and must only
be connected to a properly installed earthed
socket.
10 BD28MBK Microwave Oven
Turntable ring assembly
The accessible surface may
be hot during operation.
SETTING UP YOUR OVEN
a. Never place the glass tray upside down. The
glass tray should never be restricted.
b. Both glass tray and turntable ring assembly must
always be used during cooking.
c. All food and containers of food are always placed
on the glass tray for cooking.
d. If glass tray or turntable ring assembly cracks or
breaks, contact your nearest authorized service
center.
6. The mains voltage must correspond to the voltage
specified on the rating plate.
7. The socket must be installed and connecting cable
must only be replaced by a qualified electrician.
If the plug is no longer to accessible following
installation,an all-pole disconnecting device must
be present on the installation side with a contact
gap of at lease 3mm.
8. Adapters, multi-way strips and extension leads
must not be used. Overloading can result in a risk
of fire.