Page 1
BD28MBK 28L Built-In Microwave Oven INSTRUCTION MANUAL PLEASE READ THE INSTRUCTION MANUAL CAREFULLY BEFORE USING THE UNIT. www.belling.com.au www.belling.co.nz...
• Care should be taken not to displace the turntable similar may lead to risk of injury, ignition or fire. when removing containers from the appliance. IMPORTANT SAFETY INSTRUCTIONS BD28MBK Microwave Oven...
Page 5
• Surface of a storage cabinet can get hot. • Only use the temperature probe recommended for this oven (for ovens provided with a facility to use a temperature-sensing probe). READ CAREFULLY AND KEEP FOR FUTURE REFERENCE BD28MBK Microwave Oven IMPORTANT SAFETY INSTRUCTIONS...
Page 6
Consult a qualified electrician or serviceman if the grounding instructions are not completely understood or if doubt exists as to whether the appliance is properly grounded. BD28MBK Microwave Oven IMPORTANT SAFETY INSTRUCTIONS...
300ml (1/2 pint) water and must be cleaned carefully with a damp cloth heat on 100% microwave power for 10 minutes. when they are dirty. Wipe the oven clean using a soft, dry cloth. BD28MBK Microwave Oven CLEANING...
Microwave-safe only. Use to cover food during cooking to retain moisture. Do not allow plastic wrap to touch food. Thermometers Microwave-safe only (meat and candy thermometers). Wax paper Use as a cover to prevent splattering and retain moisture. BD28MBK Microwave Oven UTENSIL CAUTION...
Glass tray Turntable ring assembly Instruction Manual Screw Bracket Trim-kit plast i c cover A) Control panel B) Turntable shaft C) Turntable ring assembly D) Glass tray E) Observation window F) Door assembly G) Safety interlock system BD28MBK Microwave UTENSIL CAUTION...
8. Adapters, multi-way strips and extension leads be connected to a properly installed earthed must not be used. Overloading can result in a risk socket. of fire. The accessible surface may be hot during operation. BD28MBK Microwave Oven SETTING UP YOUR OVEN...
PLEASE READ THE INSTRUCTIONS CAREFULLY PLEASE NOTE ELECTRICAL CONNECTION g hich The fitted cabinet have correct ventilation as shown in cabinet dimensions. D not NOTE: Do not trap or bend the power cables. PRODUCT DIMENSIONS BD28MBK Microwave Oven INSTALLATION INSTRUCTIONS 11...
Ventilation: Option 1 down into kick panel space Cutout 45mm x 500mm top rear of cabinet 6(min) Ventilation: Option 3 (for tower installation) 45mm x cabinet width vented to top of cabinetry / into roof cavity. BD28MBK Microwave Oven INSTALLATION INSTRUCTIONS...
Page 13
FRONT EDGE 2. Make the marks on the bottom plane of cabinet according to marks"a" of the template Bracket Centre line 3. Remove the bottom cabinet template and fix the bracket with screw. Screw Bracket BD28MBK Microwave Oven INSTALLATION INSTRUCTIONS 13...
Page 14
- Make sure the back of the oven is locked by bracket. - Do not trap or kink the power cord. bracket 5. Open the door, fix the oven to the cabinet with Screw, at the installation hole. Screw Installation Hole BD28MBK Microwave Oven INSTALLATION INSTRUCTIONS...
Note: the step quantities for the adjustment time of the coding switch are as follows: 0---1 min 5 seconds 1---5 min 10 seconds 5---10 min 30 seconds 10---30 min 1 minute 30---95 min 5 minutes BD28MBK Microwave Oven OPERATIONAL INSTRUCTIONS 15...
Page 17
Press “ Start/+30Sec./Confirm “ to confirm. c) Turn “ ” to choose the default weight as the menu chart. d) Press “ Start/+30Sec./Confirm “ to start cooking. BD28MBK Microwave Oven OPERATIONAL INSTRUCTIONS...
Page 19
When the kitchen time is reached, the buzzer will ring 5 times. If the clock has been set (24-hour system), the screen will display the current time. Note: The kitchen Time is different from 24-hour system. Kitchen Timer is a timer. BD28MBK Microwave Oven OPERATIONAL INSTRUCTIONS...
If at any time in future you need to dispose of this collecting points where available. oduct please do NOT dispose of this product with household aste. Please send this product to WEEE collecting points here available. BD28MBK Microwav e Oven TROUBLE SHOOTING...
5 years from the date the product is purchased as a brand-new product from a retailer located in Australia / New Zealand. b) In the case of Belling Design products used for purposes other than personal, domestic or household purposes (including business or commercial use), a period of 90 days from the date the product is purchased as a brand-new product from a retailer located in Australia / New Zealand.
Page 22
b) The product requires repairs due to damage resulting from accident, misuse, incorrect installation, insect or vermin infestation, improper liquid spillage, cleaning or maintenance, unauthorised modification, use on an incorrect voltage, power surges and dips, voltage supply problems, tampering or unauthorised repairs by any persons, use of defective or incompatible accessories or exposure to abnormally corrosive conditions, events independent of human control which occurred after the goods left the control of Glen Dimplex;...
Page 23
d) If required by us, provide us (or any person nominated by us) with access to the premises at which the product is located at times nominated by us (so that we can inspect the product). 5. Warranty claims If you make a valid claim under this warranty and none of the exclusions set out in section 2 apply, we will, at our election, either repair the product or replace the product with a product of identical specification (or where the product is superseded or no longer in stock, with a product of as close a specification as possible).
Page 28
READ THE INSTRUCTION BOOKLET BEFORE INSTALLING AND USING THE APPLIANCE. The manufacturer will not be responsible for any damage to property or to persons caused by incorrect installation or improper use of the appliance. The manufacturer is not responsible for any inaccuracies, due to printing or transcription errors, contained in this manual.