Filling The Rinse Aid Reservoir - Bertazzoni DW60BIV Instruction Manual

Filling The Rinse Aid Reservoir

1
Remove the rinse aid reservoir cap
by rotating it counterclockwise.
3
Close the rinse aid reservoir cap by
rotating it clockwise.
Adjusting the rinse aid reservoir
Adjust lever(Rinse)
The rinse aid reservoir has six settings. Both the
recommended setting and the factory setting is "3". If the
dishes are not drying properly or are spotted, adjust the
dial to the next higher number until your dishes are spot-
free.
Reduce it if there are sticky whitish stains on your dishes or
a bluish film on glassware or knife blades.
12
Rinse-Aid indicator
2
Pour the rinse aid into the dispenser,
being careful not to overfill.
NOTE:
Clean up any spilled rinse aid with
an absorbent cloth to avoid
excessive foaming during the next
wash.