Table of Contents
Advertisement
M
AINTENANCE
R
R
EPLACING THE
The roller will wear out and is designed to be a user-replaceable part. A worn roller can cause documents to feed
in skewed at an angle, or multiple pages to feed at the same time. Before replacing the roller you should clean it
as excessive dust on the roller will make it appear worn and smooth. You cannot properly diagnose a worn roller
until you have cleaned it. You should generally replace the roller between 80,000 and 100,000 scans.
Replacement parts can be purchased from the Supplies & Accessories page for your scanner at
www.visioneer.com.
1.
Open the scanner.
2.
Locate the roller cover in the ADF door.
3.
Pinch the sides of the roller cover and pull it down to access the roller.
S
U
G
CANNER
SER
UIDE
(S
EVERSE
EPARATION
V
) R
OLLER
P
PD45/PH70
®
ISIONEER
ATRIOT
43
Advertisement
Table of Contents
