Table of Contents
Advertisement
M
AINTENANCE
Show maintenance reminders—select this option be notified when it is time to clean or replace the rollers.
n
After cleaning or replacing the rollers, click the reset button next to the roller counters in this screen.
Power Settings
Sleep mode—sleep mode is the low-power state when the scanner is not in use. You can adjust the amount
n
of time you want the scanner to wait before it goes into low power.
Click the green enter button to save any changes in the Sleep mode field.
Click the red reset button to reset to the default timeout value.
Power off—input the number of minutes you want the scanner to wait before it turns itself off.
n
Click the green enter button to save any changes in the power off field.
Click the red reset button to reset to the default timeout value.
Driver Settings
The options in this panel are for configuring how the TWAIN interface will behave in some scenarios. Please see
the TWAIN scanning guide on the installation disc for instructions.
A
P
DJUSTING THE
The paper guides are designed to release from the channel in the scanner body. This prevents damage to the
paper guides while performing maintenance or removing the input tray. When following the instructions in this
section for troubleshooting and maintaining the scanner, please make sure the paper guides are fully seated
before closing the scanner.
S
U
G
CANNER
SER
UIDE
G
APER
UIDES
V
P
PD45/PH70
®
ISIONEER
ATRIOT
37
Advertisement
Table of Contents
