Advertisement
O
PERATION
Daily Shutdown Procedure
To turn tilting braising pan off, turn THERMOSTAT dial to OFF.
Tilting the Braising Pan
1. DO NOT try to tilt braising pan with lid down.
2. Make sure the receiving pan is in place.
3. To tilt braising pan, push and hold TILT SWITCH in the UP mode until desired pan position has been reached. The
braising pan will empty when raised to the top tilt position.
When the braising pan is raised 5° or more, the heating elements will be turned off automatically.
4. Food is poured through the removable strainer into a food receiving pan positioned under the lip of the pouring spout
(Figure 2).
5. To lower braising pan, push and hold TILT SWITCH in the DOWN mode.
Excessive, consecutive lifts may cause the motor to overheat and activate
Should this occur, a cooling off time will be necessary to reset and continue the lifting operation.
8
PAGE
OF 16
FIGURE 2
NOTICE
the thermal overload causing the motor to shut down.
INSTALLATION & OPERATION MANUAL 10091 REV 0 (05/21)
Electric Power Tilt Skillets
Advertisement
