The Control Panel - DeLonghi D814WM16 Installation Instructions Manual

the control panel

Programme Dial
Different wash programmes can
be selected according to your
wash requirements.
To set your Favourite wash
programme, turn the dial to
the desired wash programme,
adjust the spin speed and
temperature, then press and
hold Spin Speed Button until a
beep is heard.
Favourite
Power Button Delay Button
Press to turn on/ This button is used
to delay the wash.
off the machine.
Press continuously
to select the time
you want to start
the wash.
• If you need to change a setting after the wash has started, turn the power OFF
then ON again. Re-select the programme, spin speed and optional functions, and then
press the Start / Pause button. (Ensure the Child Lock is off, otherwise the original
programme will continue.)
• Water is poured into the washing machine to perform an inspection at the time of
shipment from the factory, so there may be drops of water or condensation in the washing
machine. This is not an indication of a malfunction.
During initial start-up and use of the unit, there may be a slight smell while the motor is
settling in. This is not a fault; this is normal operation.
LED Display
• The delay light will be on to indicate the delay time. It will start the
programme after the selected hours.
• After the wash procedure begins, the display will show the wash
remaining time.
• When the child lock function is selected, the CHILD LOCK icon will be
illuminated.
• When the door is at the lock state, the DOOR LOCK icon will be
illuminated.
Press for 3 sec. to set Favourite
Rinse & Spin
Spin Speed
Button
Press to select the
desired spin speed
of the selected wash
programme.
Press and hold to set
as favourite one of the
wash programmes.
Start/Pause
Temperature
Button
Button
Press to start your
Press to select the
wash. Press while
desired temperature
in operation to
of the selected
pause your wash.
wash programme.
(If no temperature
indicator is lit, the
water temperature
is cold.)
GB
21