Table of Contents
Advertisement
Available languages
Available languages
installation
hose and cable lengths
How to connect from the left side
~90cm
levelling the washing machine
There are 4 levelling feet on the underside. They must be adjusted to make sure the washing
machine is level.
1. On each foot, loosen the lock ring by turning it
clockwise.
2. Adjust all four feet by rotating each upwards or
downwards.
3. Use a spirit level to ensure the washing machine
is level.
4. Tighten each lock ring by turning them anti-
clockwise (towards the washing machine body).
Ensure all four lock rings are tightened securely.
Check that the feet are still bolted to the washing
machine - if they're unbolted, the washing machine
will move around.
water supply hose
Points to remember
•
Follow the instructions in this section to avoid water leaks.
•
Don't connect the hose to a combination tap.
•
Don't twist, squash, modify or cut the hose.
•
This machine is designed to connect to the cold water supply. Do not connect to the hot
water supply.
•
Use only the new water supply hose supplied. Old hose sets should not be reused.
~80cm
How to connect from the right side
~130cm
~40cm
110 -135cm
GB
17
Advertisement
Table of Contents
