Maxx air HVWM 18PF Quick Start Manual

This safety alert symbol is used to alert you to potential
personal injury hazards. Obey all safety messages that
follow this symbol to avoid possible injury or death.
Danger indicates an imminently hazardous situation, which,
DANGER
if not avoided, will result in death or serious injury.
Warning indicates a potentially hazardous situation, which,
WARNING
if not avoided, could result in death or serious injury.
WARNING - TO REDUCE THE RISK OF FIRE, ELECTRIC SHOCK OR INJURY TO PERSONS, OBSERVE THE FOLLOWING:
• Disconnect fan when moving from one location to
another.
• Disconnect fan when removing guards
for cleaning.
• Make sure fan is on a stable surface when
in operation.
• Rain and moisture may create an
electrical hazard.
• This appliance has a 3-prong plug. To
reduce the risk of electrical shock, this
plug is intended to fit in an outlet one
way. If this plug does not fit in the outlet,
contact a qualified electrician.
Your Maxx Air fan is shipped fully assembled.
powerful, cooling breeze that the fan will provide for virtually
any indoor application. There are no additional spare parts
shipped with this item.
Specifications
Totally enclosed motor meets NEC 547-7 (2008) requirements for
use in Agricultural Areas. This unit has a 110-120 Volt A/C polarized
grounded plug. Do not remove grounding conductor from plug or
use with an extension cord.
Warning
To reduce the risk of fire or electric shock, do not
use with any solid state speed control device. This
fan motor is equipped with an automatic reset
overload device. The fan may start unexpectedly.
Do not put any object through the grilles into the
blade or motor. This fan is designed for indoor
use only. Do not use to exhaust hazardous
chemicals or vapors. Unplug unit for storage,
when not in use or moving locations.
Installation
Minimum Attachment Requirements:
studding capable of supporting at least 50 lbs.
Use a 3/8" diameter x 2" long Lag Screw with flat
Ventamatic, Ltd. P.O. Box 728, Mineral Wells, TX 76068-0728
18" Wall Mount Poultry Fan
Models: HVWM 18PF & HVWM 18CDPF
IMPORTANT SAFETY INSTRUCTIONS ▬ READ AND SAVE THESE INSTRUCTIONS
SAFETY
•
•
•
•
•
Enjoy the washer (Fig.1 not included). Attach the fan to wall using the hole in
the wall bracket with the above mentioned lag screw.
Additional screws can be used to stabilize the wall mount if needed,
however they are not required.
Please Call: 1.800.433.1626 if you have any questions about the
installation or operation of this fan.
Operating Instructions
1.
2.
WARNING
User Servicing Instructions
Warning: Unplug the fan from electrical supply before
cleaning.
1.
2.
3.
4.
Figure 1
5.
2x4
3/8" x 2"
Lag Screw
& Washer
1-800-433-1626
SAFETY INSTRUCTIONS WARNING: TO REDUCE THE RISK OF
FIRE, ELECTRIC SHOCK, OR INJURY TO PERSONS, OBSERVE
THE FOLLOWING:
Caution indicates a potentially hazardous situation, which,
CAUTION
if not avoided, may result in minor or moderate injury.
ELECTRICAL
Used to indicate an electrical shock or electrocution hazard.
SHOCK
WARNING: To reduce the risk of fire or
electric shock, do not use this fan with
any solid-state speed control device.
CAUTION: For general ventilating use
only. Do not use to exhaust hazardous
or explosive materials or vapors.
CAUTION: Disconnect the power to the
fan before cleaning.
DO NOT insert fingers or any objects
through the grille guard when fan is in
operation.
DO NOT operate fan if any part is
damaged or missing.
Plug cord into a properly grounded receptacle.
Turn the knob on the fan to select the desired speed or turn the
fan off.
Use soft, damp cloth to clean the fan.
Remove any moisture with a clean, dry cloth.
Do Not use any cleaning solution that is
harmful to the paint or plastic.
Do Not bend blade when cleaning fan.
Motor is permanently sealed and does
not require additional lubrication.
Ensure all fan guards are reinstalled as
previously installed after cleaning.
Fax: 940.325.9311
©2020 VENTAMATIC, LTD. MA HVWM 18CDPF INsMAN 1208/1106
Maxx Air
WARNING
CAUTION
CAUTION
WARNING
www.MYMAXXAIR.com