Table of Contents
Advertisement
Introduction
Additional Assistance
The planning and installation of facility cabling for network operation is a
complex and highly specialized process. Due to the different nature of each and
every cabling installation and the special problems and concerns raised by any
facility, there may be aspects of installation planning that are not covered in this
guide.
If you have questions or concerns about your cabling design, or if you require
installation personnel to perform the actual installation process, Cabletron
Systems maintains a staff of network design personnel and a sizable team of
highly-trained cabling and hardware installation technicians. The services of the
Networking Services group are available to customers at any time. If you are
interested in obtaining design assistance or a network installation plan from the
Networking Services group, contact your Cabletron Systems Sales
Representative.
In addition to the availability of Networking Services, the Cabletron Systems
Technical Support department is available to answer customer questions
regarding existing Cabletron Systems networks or planned expansion issues.
Contact Cabletron Systems at (603) 335-9400 to reach the Technical Support
department with any specific product-related questions you may have.
Related Documentation
The following publications may be of assistance to you in the design process.
Several of these documents present information supplied in this Cabling Guide in
greater or lesser detail than they are presented here.
•
•
•
•
•
•
•
•
1-4
Cabletron Systems Networking Guide - MMAC-FNB Solutions
Cabletron Systems Ethernet Technology Guide
Cabletron Systems Token Ring Technology Guide
Cabletron Systems FDDI Technology Guide
EIA/TIA 568 Specification
IEEE 802.3 Specifications
IEEE 802.5 Specifications
ANSI X3T9.5 Specification
Additional Assistance
Advertisement
Table of Contents
