Table of Contents
Advertisement
Introduction
Using This Manual
Read through this manual to become familiar with its contents and gain an
understanding of the features and capabilities of the 9C214-2 Power Supply prior
to installation and operation.
Chapter 1, Introduction , provides a brief description of the 9C214-2 Power
Supply and its features. This chapter also includes a list of related manuals and
information on getting help.
Chapter 2, Installing the 9C214-2 Power Supply , contains detailed steps for
unpacking, installing, and powering up the 9C214-2 Power Supply.
Chapter 3, 9C214-2 Power Supply Operation , contains detailed information
regarding the power supply operation.
Chapter 4, Specifications , provides detailed specifications of the 9C214-2 Power
Supply.
The 9C214-2 Power Supply
The 9C214-2 Power Supply, shown in Figure 1-1, is a 1000 watt, triple output
supply that accepts positive or negative 36–72 volt DC input. It provides power to
the three power busses within the SmartSwitch 9000 chassis. At least one power
supply must be installed; however, additional power supplies can be installed to
achieve redundancy. When two or more power supplies are properly installed,
the power supplies use a current sharing scheme where under all load conditions
each supply provides power equally.
Chapter 1
1-1
Advertisement
Table of Contents
