How To Use Air Purification; Checking Overall Cleanliness - LG I24TTP Owner's Manual

How to Use Air Purification

Ionizer and air purification filter make the indoor
air pleasant.
• Press AIR PURIFY button to start the air
purification operation.
is displayed on the display screen.
−
Using Air Purification During
Operation Modes
• During cooling, dehumidification, heating or
auto changeover operation, if you press AIR
PURIFY button, you can use air purification
operation at the same time.
• During air purification operation, if you press
MODE button, you can use cooling,
dehumidification, heating or auto changeover
operation at the same time.
Smart Air Purification
• Dust sensor detects the indoor air
contamination level, and if overall cleanliness
is Orange (Poor) or more, it automatically
starts air purification operation. When overall
cleanliness reaches Green (Good), air
purification operation stops. If you do not want
smart air purification operation, clear by
pressing AIR PURIFY button. Until you turn
off the product and turn on again, air
purification operation is not operated
automatically.
• It works only in overall cleanliness function
applied model.
CAUTION
• During air purification operation, do not touch
top side of the product. (Static electricity may
be generated by anion created from dust
collection ionizer.)
• Do not put metal objects near the appliance.
(Static electricity may be generated by anion
created from dust collection ionizer.)
24
NOTE
• Air purification single operation is the
operation with low energy consumption.
• During air purification single operation, wind
direction function can be used, but
temperature control function cannot be used.
• During cooling operation or dehumidification
operation, if you want air purification single
operation, press power button to turn off
the product, and press AIR PURIFY button.
• Ionizer and filter components may be different
for each model.

Checking overall cleanliness

It displays the indoor cleanliness.
1
Turn the appliance on.
2
During the operation, if you press PM
SENSOR button, you can check the indoor
cleanliness in each level.
• Dust concentration is displayed in unit of 1
within 8~999 μg/m . Dust concentration
3
referred to the data sheet of the sensor
manufacturer.
• Dust concentration may continuously
change according to the change of the
indoor environment.
• Overall cleanliness color is displayed
based on the highest contamination level
among fine dust(PM10), ultra fine
dust(PM2.5), and super ultra fine
dust(PM1.0).
• Overall cleanliness color is displayed in 4
levels according to the indoor
contamination level.
• If dust concentration is high, the difference
between the displayed dust concentration
and the actual dust concentration may
become bigger.
EN
Overall
cleanliness
color display
Dust size
dust concentration
display