Adding Salt - Beko DFN39530X User Manual

Preparation
If the hardness level of the supply water is
above 90 °dF or if you are using well water,
then it is recommended to use water
purification devices and special filters.
If the hardness level of the supply water is
below 13°dF, there is no need to use salt
in your dishwasher. If this is the case, "No
Salt Warning Indicator" (if any) illuminates
continuously on the panel of your machine.
If the water hardness level adjustment
is set to level 1, the "No salt warning
indicator" will illuminate continuously
although it is not necessary to use salt. If
you use salt under this condition, salt will
not be consumed and the Salt indicator will
not illuminate.
C
If you move your house, it is
necessary to readjust water
hardness level of your machine
by considering the information
given above according to the
hardness level of the supply
water in your new location.
Your machine will display the
most recently adjusted water
hardness level.

Adding salt

Water softening system needs to be
regenerated in order for the product
operates with the same performance
continuously. Dishwasher salt is used for
this purpose.
C
Use only special softening salts
produced particularly for the
dishwashers in your machine.
/41 EN
14
C
It is recommended to use
granule- or powder-formed
softening salts in the water
softening system. Do not use
salts that do not completely
dissolve in water such as table
salt or rock salt. Otherwise the
performance of the system
may deteriorate in time.
C
Salt reservoir will be filled
with water when you start
the product. For this reason,
add salt before operating the
machine.
1. Firstly, take the lower basket out to
add softening salt.
2. Turn the salt reservoir lid counter-
clockwise to open it (A, B).
Dishwasher / User's Manual