WilTec 61546 Operation Manual

Rolling work seat

Operation Manual

Rolling Work Seat

61546

Illustration similar, may vary depending on model

Please read and follow the operating instructions and safety information prior to initial operation.

Technical changes reserved!

Illustrations, functional steps and technical data may deviate insignificantly due to continuous further

developments.

Table of Contents

Need help?

Do you have a question about the 61546 and is the answer not in the manual?

Page 1 Operation Manual Rolling Work Seat 61546 Illustration similar, may vary depending on model Please read and follow the operating instructions and safety information prior to initial operation. Technical changes reserved! Illustrations, functional steps and technical data may deviate insignificantly due to continuous further...
Page 2 The information contained in this document may alter at any time without prior notice. No part of this document may be copied or otherwise duplicated without prior written consent. All rights reserved. WilTec Wildanger Technik GmbH cannot be held liable for any possible mistakes in this operating man- ual, nor in the diagrams and illustrations shown.
Page 3 Axle holder Letter Name Qty. Letter Name Qty. Screw M8×20 Washer M12 Bolt M10×15 Nylon nuts M8 Washer M8 Nylon nuts M10 Washer M10 Nylon nuts M12 © by WilTec Wildanger Technik GmbH Item 61546 Page 3 http://www.WilTec.de http://www.aoyue.eu 2021-1 http://www.teichtip.de...
Page 4 M12 washers (e) and M12 nylon nuts (h). Important Note: Reproduction and any commercial use (of parts) of this operating manual, requires a written permission of WilTec Wildanger Technik GmbH. © by WilTec Wildanger Technik GmbH Item 61546 Page 4 http://www.WilTec.de http://www.aoyue.eu...