Dyna-Glo IRSS6LPT-2P Manual page 21

OPERATION
1. Turn off all electric power to the appliance if service is to be performed.
2. Push in gas control knob slightly and turn clockwise
DO NOT FORCE.
THERMOSTATIC CONTROL OPERATION
The thermostat used on this heater senses the room tempera-
ture. At times the room may exceed the set temperature. If so,
the burner will shut off. The burner will cycle back on when
room temperature drops below the set temperature. The control
knob can be set to any comfort level between "HIGH" (5) and
"LOW"(1) (See Fig. 25).
TO TURN OFF GAS TO APPLIANCE
20
to "OFF" or " " position.
Thermostatic
Fig. 25 - Control Knob Position